00198654-01_UM_Nozzle_Cleaning_Station_EN - 第41页
4 Setting up and commissioning 4.5 Setting up the nozzle cleaning station User Manual SIPLACE Nozzle Cleaning Station 09/2019 41 Fig.24: NCS - main connections ► Connect the NCS (1) to your local duct system (tube Ø100…
4 Setting up and commissioning
4.5 Setting up the nozzle cleaning station
40 User Manual SIPLACE Nozzle Cleaning Station 09/2019
4.5 Setting up the nozzle cleaning station
Fig.22: NCS - roller and clamping system
► Move the nozzle cleaning station to it fi-
nal location and secure it in position us-
ing the clamping at the rollers.
Fig.23: NCS - leveling aid
► Open the front cover.
► Align the NCS by the screws until the
bubble sits in the middle of the level.
4 Setting up and commissioning
4.5 Setting up the nozzle cleaning station
User Manual SIPLACE Nozzle Cleaning Station 09/2019 41
Fig.24: NCS - main connections
► Connect the NCS(1) to your local duct
system (tube Ø100mm).
► Connect compressed air supply(2).
► Connect power supply(3).
NOTICE!
Protective earth (PE)
Connect the protective earth (PE) line
according to applicable local regula-
tions.
.
NOTICE
Standard "E" type socket
The electrical connection of the device is adapted to the standard "E" type sockets. If you
need to use a different standard, replace the supplied plug with a suitable replacement.
DESIGNATION → POTENTIAL
1 → L
2 → N
YELLOW-GREEN → PE
4 Setting up and commissioning
4.5 Setting up the nozzle cleaning station
42 User Manual SIPLACE Nozzle Cleaning Station 09/2019
4.5.1 Fitting the cleaning modules
The nozzle cleaning station is delivered without the cleaning options installed. To fit the tip and
shaft cleaning modules proceed as follows.
4.5.1.1 Fitting the shaft cleaning module
The assembly of the shaft cleaning modules has to be done from the back of the NCS and requires
no additional tools.
Fig.25: NCS - shaft cleaning cell
1 Shaft cleaning module 2 Guide rails
3 Stop pin 4 Fixing screw
5 Sensor for module recognition 6 Pneumatic supplies
7 Electrical connection to the sensor 8 Supply of the cleaning solution