00198654-01_UM_Nozzle_Cleaning_Station_EN - 第44页
4 Setting up and commissioning 4.5 Setting up the nozzle cleaning station 44 User Manual SIPLACE Nozzle Cleaning Station 09/2019 Fig.29: Connections ► Plug in the compressed air supply (1) , (2) and (3) at the top left…
4 Setting up and commissioning
4.5 Setting up the nozzle cleaning station
User Manual SIPLACE Nozzle Cleaning Station 09/2019 43
Fig.26: Inserting the shaft cleaning module
► Open the doors at the back of the NCS.
► Remove the black cover plate where
the module is to be installed.
► Insert the shaft cleaning module slightly
angled while placing the fitting pins
onto the black plastic support at the left
and right.
Fig.27: Hollow and end switch
► Move the module to the front until the
fitting pins sit in the hollow(1) and the
actuator operates the end switch(2).
NOTICE!
Ensure the proper seating of the seal-
ing below.
.
Fig.28: Positioning the module
► Fix the module in position using the
screw removed with the black cover
plate.
4 Setting up and commissioning
4.5 Setting up the nozzle cleaning station
44 User Manual SIPLACE Nozzle Cleaning Station 09/2019
Fig.29: Connections
► Plug in the compressed air supply(1),
(2) and (3) at the top left.
► Plug in the connection (4) for the sup-
ply of the cleaning agent.
► Plug in the connector to the sensor(5)
to detect the nozzle magazine and
secure it in position.
► Plug in the bypass / drainage(6) at the
back of the applicator.
CAUTION!
Prevent leakage
Make sure that all pneumatic and li-
quid connections are firmly in place.
.
4 Setting up and commissioning
4.5 Setting up the nozzle cleaning station
User Manual SIPLACE Nozzle Cleaning Station 09/2019 45
4.5.1.2 Fitting the tip cleaning module
The assembly of the tip cleaning modules can be done from the front of the NCS and requires no
additional tools.
Fig.30: NCS - tip cleaning cell
1 Tip cleaning module 2 Drainage and fixing of the module
3 Supply of the cleaning solution 4 Sensor for module recognition
Fig.31: Connection
► Plug in the connection for the supply of
the cleaning agent.
CAUTION!
Prevent fluid injection
Make sure that all connections carry-
ing liquid are firmly in place.
.