00198076-01_JC_PM_WF1_TX_EN - 第21页
4 WF 1 TX-Series Maintenance Check and clean the magnetic surfaces of X- and Y-Axis 4 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g …
www.asm-smt.com
4 WF 1 TX-Series Maintenance Check and clean the magnetic surfaces of X- and Y-Axis 4 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3
www.asm-smt.com
1 Move the gantries to the limit location 1. 2 Check X-Axis magnets for contamination
and damage.
3 If you see any damage contact service.
4 If OK clean the X Axis magnets. 5 Check Y-Axis magnets for contamination
and damage.
6 If you see any damage contact service.
4 WF 1 TX-Series Maintenance Check and clean the magnetic surfaces of X- and Y-Axis 4 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3
www.asm-smt.com
7 If OK clean the Y-Axis magnets. 8 Move the gantries to the limit location 2. 9 Repeat steps 2 to 8 for other gantry.