00198076-01_JC_PM_WF1_TX_EN - 第6页
www.asm-smt.com
www.asm-smt.com
Introduction
To ensure that your SIPLACE TX is always in perfect condition for use in your production environment, the machine should be maintained on a regular basis. In order to
optimize the "Uptime" for each maintenance interval four workflows have been defined combining the individual steps to form an efficient sequences of tasks to be per-
formed. All workflows are explained in detail and illustrated with clear diagrams.
Maintenance workflows
Each workflow is supported with a document (job card), which guides you efficiently through the maintenance work. The Job Card at hand covers the tasks and se-
quence for workflow 1.
– Workflow 1: Weekly maintenance tasks.
– Workflow 2: Combination of weekly and 3-monthly maintenance tasks.
– Workflow 3: Combination of weekly and 6-monthly maintenance tasks.
– Workflow 4: Combination of weekly and 12-monthly maintenance tasks.
Planning workflows
Example for the frequency of individual workflows over a period of one year.
– Workflow 1: 45 times / year
– Workflow 2: 4 times / year
– Workflow 3: 2 times / year
– Workflow 4: 1 time / year
www.asm-smt.com
www.asm-smt.com
Safety Introduction
Observe the safety instructions in the user manual
DANGER!
Nonobservance of these safety instructions may cause injury to personnel
and damage to the machine!
Please observe the safety instructions in the user manual of the relevant
machine for all work!
.
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal
safety and to avoid damage to equipment. These notes are highlighted by warning
triangles and are indicated as follows according to the level of risk:
DANGER!
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or
considerable damage to property will occur if this hazard warning is not ob-
served.
.
WARNING!
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or
considerable damage to equipment may occur if these warning instructions
are not followed.
.
CAUTION!
Definition
For the purposes of this manual, this indicates that minor injuries or damage
to property may occur if this caution is not observed.
.
NOTICE!
Definition
For the purposes of this manual, this note provides information about the
product or indicates a part of the manual that requires particular attention.
.