00193893-04 - 第60页

2 Retrofit instructions - SIPLACE HF series head re confi guration kits SIPLACE HF Series Head Reconfiguration Kits 05/2006 Edition 60 2.3.2.4 Bill of materials for T winhead HF upgrade kit (item no.: 03004927-02) Qty De…

100%1 / 110
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
59
2.3 Parts required
2.3.1 Tools and consumables required
– Set of hexagon socket spanners
– Set of screwdrivers / Phillips screwdrivers
– Cable ties
– Machine spirit level
– Mapping test plate HF 508x450 (item no.: 00373952-01)
2.3.2 Retrofit kits
2.3.2.1 TwinHead reconfiguration kit, HF (item no.: 00119621-01)
Qty Designation Item no.:
- 1 Twin Pick+Place head 03001841-02
- 1 TwinHead HF upgrade kit (see 2.3.2.4) 03004927-01
- 1 Head support plate / TwinHead seal 03011719-01
- 1 Pack for placement head 6 / 12 00066176-01
- 1 Retrofit instructions for head reconfiguration kits HF 00193893-xx
2.3.2.2 C&P 12 placement head reconfiguration kit, HF (item no.: 00119665-01)
Qty Designation Part no.:
- 1 Revolver head DLM2-12 complete 00367281-02
- 1 DLM2 upgrade kit, HF (see 2.3.2.5) 03004349-01
- 1 Sealing for head support plate / DLM 03011718-01
- 1 Pack for TwinHead 03009178-01
- 1 Retrofit instructions for head reconfiguration kits HF 00193893-xx
2.3.2.3 C&P 6 placement head reconfiguration kit, HF (Item no.: 00119666-01)
Qty Designation Part no.:
- 1 Revolver head DLM2-6 complete 00367020-02
- 1 DLM2 upgrade kit, HF (see 2.3.2.5) 03004349-01
- 1 Sealing for head support plate / DLM 03011718-01
- 1 Pack for TwinHead 03009178-01
- 1 Retrofit instructions for head reconfiguration kits HF 00193893-xx
2
2
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
60
2.3.2.4 Bill of materials for Twinhead HF upgrade kit (item no.: 03004927-02)
Qty Designation Part no.:
- 1 P+P head adapter 03000902-xx
- 1 Axis control for Twin head axes 03004100-xx
- 1 Ribbon cable set, TWIN 03004332-xx
- 1 Reject bin, IC head 03003049-xx
- 2 DIN912-M6 x 12-A2-70 03045087-xx
- 2 DIN 125-A 6.4-140HV-A2 00315188-xx
- 6 DIN912-M3 x 6-A2 00201463-xx
- 1 Cable support f. P+P / C+P20 head adapter, complete03005195-xx
- 1 Nozzle changer, complete / P+P 03003138-xx
- 1 Component camera, stationary, P+P (TYPE 22) 50x4003002063-xx
- 4 DIN912-M5 x 16-8.8 00845044-xx
- 2 DIN 913 - M 6 x 50-ST 03005958-xx
- 3 DIN 913 - M 4 x 6-ST 00309422-xx
- 1 TwinHead fixing set for HF 03011722-xx
- 1 TwinHead hoses for HF series/X series 03006778-xx
- 1 Vision Control Unit 1, complete 03004635-xx
- 1 HF cable: Vision Flash 03006597-xx
- 1 Partition plate for fiducial, complete, L600 03022077-xx
- 1 Axis, KSP-A363, Smart Drive 00353594-xx
- 2 TQM 167 SIPLACE embedded module 03003536-xx
2.3.2.5 Bill of materials for DLM2 HF upgrade kit (item no.: 03004349-02)
Qty Designation Part no.:
- 1 Head board set/DLM2, complete, 16 bit 03037632-xx
- 1 Axis control for DLM2 head axes 03003391-xx
- 7 DIN912-M3 x 6-A2 00201463-xx
- 1 DIN 985 - M3 - A2-70 00328897-xx
- 2 SN70093 -3-FSt-mechZn-f 00343054-xx
- 1 Spacer bolt, type B i/a-M3x7-ST 00324407-xx
- 1 Spacer bolt, type B i/a-M3x9-ST chrome 00317898-xx
- 1 Ribbon cable set, DLM 03004333-xx
- 1 Ribbon cable, DLM - CO 03004334-xx
- 1 Cable support f. DLM2 head adapter, complete 03005194-xx
- 6 DIN 913 - M 4 x 6-ST 00309422-xx
- 1 DLM2 fixing set for HF 03011721-xx
- 1 DLM2 hoses for HF series/X series 03006775-xx
- 1 Container 03003719-xx
- 1 Axis, KSP-A363 Smart Drive (2 x VC03) 03037822-xx
- 1 Processor board, 80C515C HF 03013014-xx
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
61
2.4 Converting from C&P head to TwinHead
: Switch the placement machine on at the main switch.
2
: Run the machine until it is empty and set down the nozzles.
: Dock the component trolley out of the placement machine.
2.4.1 Configuring the TwinHead with the machine configuration wizard
: Start the machine configuration wizard: Start--> Programs --> Machine Configuration Wizard
or
Start SITEST and select "Settings --> Machine Configuration".
: Set the new placement head and the cameras and nozzle changers in the machine configura-
tion wizard.
Don't forget to save your entries!
2.4.2 Changing the camera setting
When installing 504.02 for the first time this modification should already be implemented and the-
refore only be checked. 2
When upgrading from 504.01 to 504.02, this value is not automatically changed and must be ma-
nually corrected in the KamDat.ma for PA1 (see next page): 2
2
2
2
2
2
2
2
2
2
2
2
2