00193893-04 - 第81页

SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit in structions - SIPLACE HF seri es head reconfiguration kits 05/2006 Edition 81 2.4.7 Replacing the servo cards : Use the machine key to open the door of the servo u…

100%1 / 110
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
80
: Connect the exhaust air hoses.
2
2
: Plug the TQM 167 modules into the head main board.
2
2
2
This item only applies if the DLM2 placement head has been equipped with an 8 bit head proces-
sor. There is no TQM 167 module on the head interface. 2
Do not convert the head interface in this case. 2
On each segment for the TwinHead attach a TQM module ( item no. 03003536 S 02 ) on the head
main board (also see TI 44D05045). 2
2
2
TQM modu-
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
81
2.4.7 Replacing the servo cards
: Use the machine key to open the door of the servo unit.
: Pull out servo boards A 9, A 11 and A 15 (see reference plan on the back of the door).
It is a good idea to label the servo boards to avoid any confusion.
2
2
: Plug in the other relevant servo boards and the A 13 into the drawer unit.
PLEASE NOTE: 2
From software version 505 onwards, the C&P head can also be fitted on gantry 2, in which case
the servo boards must be arranged as follows if the head is converted back to the TwinHead: 2
2
2
A10 A12
A14 A16
A 9
A 11
A 15
A 13
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
82
: Set the DIP switches on the vision control unit as shown in the table below:
2
: Check whether the CAN bus connector and the ribbon cable for the camera connection are
plugged in.
2
2.4.8 Configuring the TwinHead in SITEST
Detailed instructions for configuring the placement head can be found in the SITEST online help
under Settings / Settings for the TwinHead. 2
Vision control unit
CAN bus connector
Camera cable