00193893-04 - 第85页
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit in structions - SIPLACE HF seri es head reconfiguration kits 05/2006 Edition 85 : Calibrate the T winHead, camera and nozzle changer . : Carry out the mapping, if ne…
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
84
2
Note
You can only perform a download if you have
logged in at the Service (Siemens) access level.
All axes tab selected
Opens the About
firmware dialog box which
allows you to display
information about the
current download version.
Opens a dialog box which
allows you to copy the selected
firmware file into the directory
C:\SRProgramme\CanFW.
File
The following file extensions are permitted: hex, jed
and bhx. These have no effect on the firmware.
Variant ID
Gives information about the type of firmware version.
O: Series status
A-Z: Special design solution
Hardware ID
Gives information about the hardware status of the
subsystems.
1-3: Conveyor
Download destination
1: Application
0: BIOS
This allows you to update the new axis firmware simultaneously for all
axes.
All axes
Activate/Deactivate
Current version
Firmware version available on the individual machine components.
Download version
The version which may be loaded can be found in the directory
C:\SRProgramme\CanFW.
Auto download
active:
When this option is activated this automatic download is carried out.
All data same as 1
If all subsystems have the same hardware status, the same download
version will be used.
Target
Application 1 / 2
When activated, the firmware that controls the actions of the
subsystem is loaded.
BIOS
When activated, the operating system for the subsystems is loaded.
Options
Include special designs
When the special designs feature is activated, the range of download
versions to select from is larger.
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
85
: Calibrate the TwinHead, camera and nozzle changer.
: Carry out the mapping, if necessary.
2
: Restart again.
This completes the conversion.
2
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
86
2.5 Converting from TwinHead to C&P head
: Switch the placement machine on at the main switch.
2
: Run the machine until it is empty and set down the nozzles.
: Dock the component trolley out of the placement machine.
2.5.1 Configuring the C&P head using the machine configuration wizard
: Start the machine configuration wizard: Start--> Programs --> Machine Configuration Wizard
or
Start SITEST and select "Settings --> Machine Configuration".
: Set the new placement head and the cameras and nozzle changers in the machine configura-
tion wizard.
2
: Switch the placement machine off at the main power switch.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2