00193893-04 - 第94页
2 Retrofit instructions - SIPLACE HF series head re confi guration kits SIPLACE HF Series Head Reconfiguration Kits 05/2006 Edition 94 : Open the strain relie f clip (pushbutton). 2 2 : Unscrew the entire strain relief. …
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
93
2.5.4 Replacing the placement head
2
Wear an ESD armband for the whole time you are working on the placement head and servos. 2
2
2
The conversion is easiest to carry out from locations 2 and 4. 2
2
2
: Disconnect the exhaust air hoses.
2
2
: Detach these hoses and the blanking plug.
2
Blanking plug
Hoses
2 Retrofit instructions - SIPLACE HF series head reconfiguration kits SIPLACE HF Series Head Reconfiguration Kits
05/2006 Edition
94
: Open the strain relief clip (pushbutton).
2
2
: Unscrew the entire strain relief.
2
: Detach the four ribbon cables from the TwinHead (photograph below).
2
2
2
2
2
2
2
2
Plug
SIPLACE HF Series Head Reconfiguration Kits 2 Retrofit instructions - SIPLACE HF series head reconfiguration kits
05/2006 Edition
95
: Loosen the four screws on each TwinHead module and remove both modules.
2
2
: Loosen the four screws on the board and remove the board.
Be careful not to lose the washers!
2
2
2
2
Screws