00195642-01_IM-SetupCenter-3.0_EN - 第61页
Installation Setup Center Software Installation Installation Manual SIPLACE Setup Center V3.0 61 X Place the product CD in your CD- ROM drive. X The Start screen appea rs. Step 2 Licence dialog X Read the license agree m…
Installation
Software Installation Setup Center
60 Installation Manual SIPLACE Setup Center V3.0
X Click Next if you accept all the information entered.
X If you want to change any settings, click the Back button until you get back to the dialog box in
question.
X There, enter your changes and click Next to continue as usual.
Step 6
X The installation routine starts.
X The "Setup Complete" window appears if the installation has been completed successfully.
X Click Finish.
6.3.1.3 Forced Setup Verification
The software CD "SIPLACE Setup Center 3.0" contains the activation of the forced setup verification and
the component level indicator.
The following settings can be configured during the installation at the SIPLACE station:
Configuration of the Splice detection (If not X-machine)
Deactivation of Fill Level Control for “empty running tracks” and Activation for "Filling level correction"
Activation of locked tracks without scanning
Traceability data creation
Installing Forced Setup Verification and CLI
The dialog boxes shown below will be displayed during the installation procedure.
Step 1 Welcom dialog
X Log on as administrator to the station PC.
NOTE:
Activation of forced setup verification and the component level indicator at the station software
70x is set by SIPLACE Pro.
X It is not necessary to activate using the activation CD.
NOTE:
Traceability settings can only be changed, if the Tractability Option at the station is installed.
Installation
Setup Center Software Installation
Installation Manual SIPLACE Setup Center V3.0
61
X Place the product CD in your CD-ROM drive.
X The Start screen appears.
Step 2 Licence dialog
X Read the license agreement. If you agree with the conditions, click I accept ..., otherwise click on I
do not accept.... If you select I do not accept ..., the installation procedure will be terminated.
X Click on Next, to continue the installation procedure.
Step 3 Setup verification system
X The station software version 407 and 505 offers two different interfaces to the Setup verification
system. By choosing the corresponding Setup verification system the interface will be configured in
the station-software accordingly.
NOTE:
This Dialog will only appear for the machine with the station-software version 407 and 505!
Installation
Software Installation Setup Center
62 Installation Manual SIPLACE Setup Center V3.0
X Click Next to continue.
Step 4 Configuration of the Splice detection
X Select the checkbox Splice detection existing, if a splice detection is available.
X Enter the COM Port where Splice detection is plugged in or leave empty the entry field.
X Click Next to continue.
Step 5a Fill Level Control (1)
X If the fill level control should be disabled for single tracks, activate the checkbox “Running tracks”
empty is permitted. After that you can let single tracks go empty consciously.
NOTE:
This dialog will not appear for X-serie machines since the splice interface is always integrated
into the X feeders and is not available for S feeders at these machines!