00195642-01_IM-SetupCenter-3.0_EN - 第64页

Installation Software Installation Setup Center 64 Installation Manual SIPLACE Setup Center V3.0 X Click Next to continue. Step 7 Traceability X Here you can choose wh ether the Traceab ility Data should be created. X Fu…

Installation

Setup Center Software Installation

Installation Manual SIPLACE Setup Center V3.0

X Click Next to continue.

Setup 5b Fill Level Control (2)

X If the filling level correction should be allowed, activate the checkbox Operator may correct the

filling level. After that the operator may correct the filling level. Otherwise only the user with the right

"LineEngineer" and higher can correct the filling level.

X Click Next to continue.

Step 6 Activation of locked tracks

X Choose Activation without barcode reading is allowed, you can activate the locked tracks on the

machine GUI, by clicking on the button chosen track in the overview of the empty feeders.

X If the checkbox is not selected, you can activate the locked tracks only by scanning the barcode of

packaging unit again.

Installation

Software Installation Setup Center

64 Installation Manual SIPLACE Setup Center V3.0

X Click Next to continue.

Step 7 Traceability

X Here you can choose whether the Traceability Data should be created.

X Furthermore you can select the File version 1.0 for standard TRC file or the File version 2.0 for

extended TRC file.

X Click Next to continue. Wait until the next dialog box appears. It can be take a few minutes.

Step 8 Overview of the settings

X Here you will see the overview of the settings.

X Click Back to review or change the settings.

X Click Next to continue the installation.

NOTE:

Traceability settings can only be changed, if the Traceability Option is installed at the station.

Installation

Setup Center Software Installation

Installation Manual SIPLACE Setup Center V3.0

Step 9 Finishing the installation

X Click Finish to end the installation.