00195642-01_IM-SetupCenter-3.0_EN - 第77页
Installation Motorola / Symbol MC70 Scanner Configura tion Steps to pe rform after Installation Installation Manual SIPLACE Setup Center V3.0 77 6.4.4 Motorola / Symbol MC 70 Scanner Configuration 6.4.4.1 Configurate Set…
Installation
Steps to perform after Installation DATALOGIC Scanner Configuration
76 Installation Manual SIPLACE Setup Center V3.0
6.4.3.5 Changing the cradle address
If you want to change the cradle address in the future, you should notify that all previously connected
scanners will be disconnected. You have to reconfigure them again.
X Click “Start” to continue.
X Click “Yes” to confirm the change.
Installation
Motorola / Symbol MC70 Scanner Configuration Steps to perform after Installation
Installation Manual SIPLACE Setup Center V3.0
77
6.4.4 Motorola / Symbol MC70 Scanner Configuration
6.4.4.1 Configurate Setup Center
The communication between Setup Center and scanner is achieved by network connection (socket).
Setup Center takes the role of the server and the scanner that one of the client.
Start Setup Center and open the setting via Tools -> Settings. Within the group Scanner the following
entry is now visible:
Activate the interface by selecting "activated". Check the fire wall settings whether the port chosen by
Setup Center is enabled and correct it if necessary. To accept the settings close the configuration dialog
with "OK".
NOTE:
Please configurate the barcode scanner for the operation within WLAN network - as described
in document Installation Manual WLAN Infrastructure for SIPLACE (item no. 00195606-xx).
Installation
Steps to perform after Installation Motorola / Symbol MC70 Scanner Configuration
78 Installation Manual SIPLACE Setup Center V3.0
6.4.4.2 Configure Setup Center Client
After the installation routine has restarted the scanner the Setup Center Client is started automatically.
X Open the configuration dialog via File->Settings.
X Type the IP-address/name of the PC where Setup Center is installed.
X Enter the port for which the scanner interface is configurated (default:7575).