00195642-01_IM-SetupCenter-3.0_EN - 第80页
Installation Steps to perform after Installation Motorola / Symbol MC70 Scanner Configuration 80 Installation Manual SIPLACE Setup Center V3.0 6.4.4.3 Est ablishing Connection X Start Setup Center. X Click on "Conne…
Installation
Motorola / Symbol MC70 Scanner Configuration Steps to perform after Installation
Installation Manual SIPLACE Setup Center V3.0
79
X Configurate the volume of the buzzer. The buzzer gives accustical feedback in operation mode of
Setup Center.
X Here you can set a password to prevent modification on the scanner configuration.
For the first editing of the configuration the password is empty. In this case safety is deactivated. You
can set a password now. By confirmation with "OK" all settings were saved.
Installation
Steps to perform after Installation Motorola / Symbol MC70 Scanner Configuration
80 Installation Manual SIPLACE Setup Center V3.0
6.4.4.3 Establishing Connection
X Start Setup Center.
X Click on "Connect" to establish a connection to Setup Center.
In case the connection fails check the network settings again.
The software is now successfully configured.
6.4.4.4 SIPLACE Scanner Config Tool
Scanning problems with 1D barcodes
If the MC70 is unable to scan most of your 1D barcodes, use the following configuration utility, to resolve
the problems.
X Please exit all running applications on scanner and Symbol AppCenter to continue.
X Select Start->Programs to show present applications on scanner.
Installation
Motorola / Symbol MC70 Scanner Configuration Steps to perform after Installation
Installation Manual SIPLACE Setup Center V3.0
81
X Select SIPLACE Scanner Config Tool to continue.
X Choose the language from list.
X Press Continue to proceed.