00196626-06_AI_Portalmodularitaet_SX12_de_en - 第71页
Brief Description Machine Variants Overview Gantry Modularity Portalmodular ität 71 2 Brief Description These assembly instructions describe the installation and r emov al o f a g antry as par t of the ga ntry mod - ular…
Introduction
Abbreviations SIPLACE on the World Wide Web (WWW)
70 Gantry Modularity Portalmodularität
1.3.5 SIPLACE on the World Wide Web (WWW)
Log into our SIPLACE
®
homepage at http://www.siplace.com.
► You can choose between the German and English versions.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can access the
SIPLACE User Group
. Here you can call up special
information about our placement systems e.g.
▪ Technical documentation,
▪ Technical information,
▪ Spare parts lists etc.
Registration for the user group is very simple:
► Click on the Register link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with USER ID and password.
1.4 Abbreviations
Abbreviations Description
PA Placement area
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
C&P12, CP12 Collect&Place head with 12 segments
C&P20, CP20 Collect&Place head with 20 segments
C&P6, CP6 Collect&Place head with 6 segments
CoD Capacity on Demand
CPP Collect&Pick&Place head
CPx Collective term for CPP, CP20, CP12 and/or CP6
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
FHE Fast Head Exchange
LBO Long Board Option
PCB Board
P&P Pick&Place
TH TwinHead
Brief Description
Machine Variants Overview
Gantry Modularity Portalmodularität 71
2 Brief Description
These assembly instructions describe the installation and removal of a gantry as part of the gantry mod-
ularity procedure for SIPLACE SX1/SX2 machines.
2.1 Overview
This section provides an overview of the "Capacity on Demand" options for SIPLACE SX1/SX2 ma-
chines.
2.1.1 Machine Variants
Type Gantry configuration Description
SX+ Without gantry
"Add Feeder Slots"
Feed through from
SW 704.xx
The machine has been prepared for a gantry upgrade
(SX1), i.e. a trailing cable and two GCUs are prefitted for
one gantry.
SX+ prepared Without gantry,
Feed through from
SW 704.xx
The machine has been prepared for a gantry upgrade
(SX1/2), i.e. two trailing cables and three GCUs are pre-
fitted for two gantries.
SX1 unpre-
pared
One gantry The machine has not been prepared for a gantry up-
grade, i.e. a trailing cable and two GCUs are prefitted for
one gantry. To upgrade to SX2, please contact your
SIPLACE Service team.
SX1 prepared One gantry The machine has been prepared for a gantry upgrade
(SX2), i.e. two trailing cables and three GCUs are prefit-
ted for two gantries.
SX2 Two gantries The machine can be downgraded to a SX1 prepared. It
is then prepared for a gantry upgrade to SX2, i.e. two
trailing cables and three GCUs are fitted.
Brief Description
Overview Head Configuration
72 Gantry Modularity Portalmodularität
2.1.2 Head Configuration
Various head configurations are possible. These vary according to the machine type used. Thereby it is
possible to fit the SIPLACE SX perfectly to the production requirements.
SIPLACE SX+
▪ Machine without gantry
▪ Prepared for a gantry upgrade to a SX1
▪ Can be operated in "Feed through" mode from SW704.xx
Head configuration SIPLACE SX+
SIPLACE SX+ prepared
▪ Machine without gantry
▪ Prepared for a gantry upgrade to a SX1/SX2
▪ Can be operated in "Feed through" mode from SW704.xx
Head configuration SIPLACE SX+ prepared
1. Location 1 – inner position
2. Location 2 – inner position
3. Trailing cable gantry 1
4. Trailing cable gantry 2
5. GCU1
6. GCU2
7. GCU3
T = transport direction
GCU1 GCU2 GCU3 Trailing cable gantry
1
Trailing cable gantry
2
SX+ X X - X -
SX+ prep. X X X X X
SX1 X X - X -
SX2 prep. X X X X X
SX2 X X X X X
Gantry 1 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)