00196626-06_AI_Portalmodularitaet_SX12_de_en - 第72页

Brief Description Overview Head Configuration 72 Gantry Modularity Portalmodularität 2.1.2 Head Configuration Various head configurations a re possible. These vary according to t he machine typ e u sed. Thereby it is pos…

100%1 / 120
Brief Description
Machine Variants Overview
Gantry Modularity Portalmodularität 71
2 Brief Description
These assembly instructions describe the installation and removal of a gantry as part of the gantry mod-
ularity procedure for SIPLACE SX1/SX2 machines.
2.1 Overview
This section provides an overview of the "Capacity on Demand" options for SIPLACE SX1/SX2 ma-
chines.
2.1.1 Machine Variants
Type Gantry configuration Description
SX+ Without gantry
"Add Feeder Slots"
Feed through from
SW 704.xx
The machine has been prepared for a gantry upgrade
(SX1), i.e. a trailing cable and two GCUs are prefitted for
one gantry.
SX+ prepared Without gantry,
Feed through from
SW 704.xx
The machine has been prepared for a gantry upgrade
(SX1/2), i.e. two trailing cables and three GCUs are pre-
fitted for two gantries.
SX1 unpre-
pared
One gantry The machine has not been prepared for a gantry up-
grade, i.e. a trailing cable and two GCUs are prefitted for
one gantry. To upgrade to SX2, please contact your
SIPLACE Service team.
SX1 prepared One gantry The machine has been prepared for a gantry upgrade
(SX2), i.e. two trailing cables and three GCUs are prefit-
ted for two gantries.
SX2 Two gantries The machine can be downgraded to a SX1 prepared. It
is then prepared for a gantry upgrade to SX2, i.e. two
trailing cables and three GCUs are fitted.
Brief Description
Overview Head Configuration
72 Gantry Modularity Portalmodularität
2.1.2 Head Configuration
Various head configurations are possible. These vary according to the machine type used. Thereby it is
possible to fit the SIPLACE SX perfectly to the production requirements.
SIPLACE SX+
▪ Machine without gantry
▪ Prepared for a gantry upgrade to a SX1
▪ Can be operated in "Feed through" mode from SW704.xx
Head configuration SIPLACE SX+
SIPLACE SX+ prepared
▪ Machine without gantry
▪ Prepared for a gantry upgrade to a SX1/SX2
▪ Can be operated in "Feed through" mode from SW704.xx
Head configuration SIPLACE SX+ prepared
1. Location 1 – inner position
2. Location 2 – inner position
3. Trailing cable gantry 1
4. Trailing cable gantry 2
5. GCU1
6. GCU2
7. GCU3
T = transport direction
GCU1 GCU2 GCU3 Trailing cable gantry
1
Trailing cable gantry
2
SX+ X X - X -
SX+ prep. X X X X X
SX1 X X - X -
SX2 prep. X X X X X
SX2 X X X X X
Gantry 1 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Brief Description
Overview of "Fast Gantry Modularity" Overview
Gantry Modularity Portalmodularität 73
SIPLACE SX 1
▪ Machine with one gantry .
▪ Not prepared for a gantry upgrade to a SX2
▪ Upgrade to SX2 by SIPLACE Service
Head configuration SIPLACE SX1
SIPLACE SX1 prepared
▪ Machine with one gantry .
▪ Prepared for a gantry upgrade to a SX2
Head configuration SIPLACE SX1 prepared
SIPLACE SX 2
▪ Machine with two gantries
▪ This machine can be downgraded to a SX1 prepared. It will then be prepared for a gantry upgrade
to a SX2.
Head configuration SIPLACE SX2
1)
A CPP and a stationary camera require the high position (CPP_H) and the outer table position.
2)
A TH and a stationary camera require the outer table position.
2.1.3 Overview of "Fast Gantry Modularity"
The following flow diagrams show the key steps to be performed. The exact steps required depend on
the individual machine type.
A differentiation needs to be made between the first and any later upgrades (2. to n.), in relation to the
Fast Gantry Modularity function, as additional work is required for the first upgrade (e.g. installing the
nozzle changer, reject bin and sensors). This additional work does not need to be repeated for later up-
grades, as these parts can remain in the machine during the gantry download.
The lowest time needed for work, approx. 30 min, is incurred during upgrade of an SX1 prepared ma-
chine to an SX2, which is equipped with a C&P20 or CPP head for the second gantry. This is shown by
the broken lines in the flow diagrams.
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
+ Upgrade kit by SIPLACE Service
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)