00196626-06_AI_Portalmodularitaet_SX12_de_en - 第73页

Brief Description Overview of "Fast Gantr y Modularity" Overview Gantry Modularity Portalmodular ität 73 SIPLACE SX 1 ▪ Machine with one gantry . ▪ Not prepared for a ga ntry upgrade to a SX2 ▪ Upgrade to SX2 b…

100%1 / 120
Brief Description
Overview Head Configuration
72 Gantry Modularity Portalmodularität
2.1.2 Head Configuration
Various head configurations are possible. These vary according to the machine type used. Thereby it is
possible to fit the SIPLACE SX perfectly to the production requirements.
SIPLACE SX+
▪ Machine without gantry
▪ Prepared for a gantry upgrade to a SX1
▪ Can be operated in "Feed through" mode from SW704.xx
Head configuration SIPLACE SX+
SIPLACE SX+ prepared
▪ Machine without gantry
▪ Prepared for a gantry upgrade to a SX1/SX2
▪ Can be operated in "Feed through" mode from SW704.xx
Head configuration SIPLACE SX+ prepared
1. Location 1 – inner position
2. Location 2 – inner position
3. Trailing cable gantry 1
4. Trailing cable gantry 2
5. GCU1
6. GCU2
7. GCU3
T = transport direction
GCU1 GCU2 GCU3 Trailing cable gantry
1
Trailing cable gantry
2
SX+ X X - X -
SX+ prep. X X X X X
SX1 X X - X -
SX2 prep. X X X X X
SX2 X X X X X
Gantry 1 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Brief Description
Overview of "Fast Gantry Modularity" Overview
Gantry Modularity Portalmodularität 73
SIPLACE SX 1
▪ Machine with one gantry .
▪ Not prepared for a gantry upgrade to a SX2
▪ Upgrade to SX2 by SIPLACE Service
Head configuration SIPLACE SX1
SIPLACE SX1 prepared
▪ Machine with one gantry .
▪ Prepared for a gantry upgrade to a SX2
Head configuration SIPLACE SX1 prepared
SIPLACE SX 2
▪ Machine with two gantries
▪ This machine can be downgraded to a SX1 prepared. It will then be prepared for a gantry upgrade
to a SX2.
Head configuration SIPLACE SX2
1)
A CPP and a stationary camera require the high position (CPP_H) and the outer table position.
2)
A TH and a stationary camera require the outer table position.
2.1.3 Overview of "Fast Gantry Modularity"
The following flow diagrams show the key steps to be performed. The exact steps required depend on
the individual machine type.
A differentiation needs to be made between the first and any later upgrades (2. to n.), in relation to the
Fast Gantry Modularity function, as additional work is required for the first upgrade (e.g. installing the
nozzle changer, reject bin and sensors). This additional work does not need to be repeated for later up-
grades, as these parts can remain in the machine during the gantry download.
The lowest time needed for work, approx. 30 min, is incurred during upgrade of an SX1 prepared ma-
chine to an SX2, which is equipped with a C&P20 or CPP head for the second gantry. This is shown by
the broken lines in the flow diagrams.
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
+ Upgrade kit by SIPLACE Service
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Brief Description
Overview Overview of "Fast Gantry Modularity"
74 Gantry Modularity Portalmodularität
Upgrade of SX+ and SX+ prepared
Upgrade of SX1 and SX1 prepared