00196626-06_AI_Portalmodularitaet_SX12_de_en - 第74页
Brief Description Overview Overview of "Fast Gantry Modularity" 74 Gantry Modularity Portalmodularität Upgrade of SX+ and SX+ p repared Upgrade of SX1 and SX1 prepared
Brief Description
Overview of "Fast Gantry Modularity" Overview
Gantry Modularity Portalmodularität 73
SIPLACE SX 1
▪ Machine with one gantry .
▪ Not prepared for a gantry upgrade to a SX2
▪ Upgrade to SX2 by SIPLACE Service
Head configuration SIPLACE SX1
SIPLACE SX1 prepared
▪ Machine with one gantry .
▪ Prepared for a gantry upgrade to a SX2
Head configuration SIPLACE SX1 prepared
SIPLACE SX 2
▪ Machine with two gantries
▪ This machine can be downgraded to a SX1 prepared. It will then be prepared for a gantry upgrade
to a SX2.
Head configuration SIPLACE SX2
1)
A CPP and a stationary camera require the high position (CPP_H) and the outer table position.
2)
A TH and a stationary camera require the outer table position.
2.1.3 Overview of "Fast Gantry Modularity"
The following flow diagrams show the key steps to be performed. The exact steps required depend on
the individual machine type.
A differentiation needs to be made between the first and any later upgrades (2. to n.), in relation to the
Fast Gantry Modularity function, as additional work is required for the first upgrade (e.g. installing the
nozzle changer, reject bin and sensors). This additional work does not need to be repeated for later up-
grades, as these parts can remain in the machine during the gantry download.
The lowest time needed for work, approx. 30 min, is incurred during upgrade of an SX1 prepared ma-
chine to an SX2, which is equipped with a C&P20 or CPP head for the second gantry. This is shown by
the broken lines in the flow diagrams.
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
+ Upgrade kit by SIPLACE Service
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Gantry 1 C&P20A CPP_L
CPP_H with
1)
stat.
camera
CPP_H with
1)
/
without stat.
camera
TH
2)
TH
2)
Gantry 2 C&P20A CPP_L
CPP_H with
1)
/ with-
out stat. camera
TH
2)
CPP_H
TH
2)
Brief Description
Overview Overview of "Fast Gantry Modularity"
74 Gantry Modularity Portalmodularität
Upgrade of SX+ and SX+ prepared
Upgrade of SX1 and SX1 prepared
Brief Description
Overview of "Fast Gantry Modularity" Overview
Gantry Modularity Portalmodularität 75
These arrows show the gantry upgrade procedure involving the least work for the
relevant machine types.
Work to be performed:
1 Prepared kit 180 min SIPLACE Service
2 Rerail gantry 15 min Customer
3 NC row 1 30 min Customer
NC row 2 20 min Customer
4 Outer table position 60 min SIPLACE Service, cus-
tomer
5 Reject bin sensors (op-
tional)
15 min Customer
6 Stationary Cameras 30 min SIPLACE Service, cus-
tomer
7 Calibrating the machine 15 min Customer
8 PCB/component map-
ping
30 min per conveyor
lane CPx
70 min per conveyor
lane TH
SIPLACE Service, cus-
tomer
CAUTION
PCB/component mapping
If a prepared kit is installed at the customer site and a second gantry is mounted for the first
time, a complete PCB-/Component mapping for the 2nd gantry is required.
This is necessary because of the extended Y-traversing path and the Y-drive motor lying on the
other side of the machine.
If a SX1 machine is shipped from the factory with a prepared kit, no mapping is required, except
a gantry with a TwinHead is mounted. (See "3.6.6 Performing Calibration" [ ➙ 104])