00196626-06_AI_Portalmodularitaet_SX12_de_en - 第80页

Brief Description Scope of Delivery C&P20A Head 80 Gantry Modularity Portalmodularität 2.2.1 C&P20A Head 2.2.2 TwinHead P&P 2.2.3 CPP Head 2.2.4 Gantry 2.2.5 Gantry Carrier Plate for SX1/SX2 [03012160-xx] Des…

100%1 / 120
Brief Description
Additional Work Scope of Delivery
Gantry Modularity Portalmodularität 79
2.2 Scope of Delivery
▪ Gantry carrier [00519814-xx].
▪ Gantry lift [00519813-xx]
The following gantry-head combinations and options are available for SIPLACE SX1 (SX+ Prepared):
Options for a gantry with C&P20 head (SpeedStar) Item No.
1 x nozzle changer C&P20 SX1/2 (position 1 or 2) – row 1 00519715-xx
1 x nozzle changer C&P20 SX1/2 (position 3 or 4) – row 2 00519843-xx
1 x query component reject bin 00519848-xx
Options for a gantry with CPP head (MultiStar) Item No.
1 x nozzle changer CPP SX series (position 1 or 2) – row 1 00519841-xx
1 x nozzle changer CPP SX series (position 3 or 4) – row 2 00519842-xx
1 x query component reject bin 00519848-xx
Stationary cameras (optional)
IC camera, type 33 00519902-xx
FC camera, type 25 00519918-xx
Options for a gantry with TwinHead Item No.
1x reject bin sensors 00519848-xx
Stationary camera:
FC camera, type 25 (optional) 00519918-xx
NOTICE
BOMs for regular options
The BOMs for regular options can be found in the respective assembly instruction manuals.
► (See also "3.6.5 Fitting the Nozzle Changer and Options" [ ➙ 103]).
NOTICE
Delivery state "Prepared" for gantry modularity
Your machine can be upgraded at a later stage with the prepared kit [00519810-xx]. Contact
your SIPLACE Service team for details.
Brief Description
Scope of Delivery C&P20A Head
80 Gantry Modularity Portalmodularität
2.2.1 C&P20A Head
2.2.2 TwinHead P&P
2.2.3 CPP Head
2.2.4 Gantry
2.2.5 Gantry Carrier Plate for SX1/SX2 [03012160-xx]
Designation Item No.
C&P20A placement head for CoD 00168605-xx
C&P20A placement head 03062095-xx
Upgrade kit C&P20 / B series 03065866-xx
Component reject bin up to 6x6 for P001 03062378-xx
Designation Item No.
TwinHead P&P for CoD 00168606-xx
TwinHead P&P/THK 03033629-xx
Basic set TwinHead, SX1/2 03079380-xx
Nozzle changer assembly / TH / B series 03062452-xx
Nozzle set, TwinHead 03019633-xx
Upgrade kit for stationary camera type 33, SX1/2 03078931-xx
Designation Item No.
CPP placement head for CoD 00168607-xx
CPP placement head / without camera 03053528-xx
Upgrade kit CPP / SX1/2 03065864-xx
Component reject bin up to 6x6 for P001 03062378-xx
Left bin 03063238-xx
Designation Item No.
GR gantry/P001 for CoD 00168608-xx
GR gantry/P0018 03062383-xx
Gantry carrier SX1/2 03064450-xx
Transportation crate for SX gantry system 03079586-xx
Amount Designation Item No.
1 Holder 03068900-xx
2 Anchor 03068901-xx
1 Distance plate 03016437-xx
2 DIN 6912-M8 x 40-A2-70 03046168-xx
8 DIN 125-A 8.4-140HV-A2 03045649-xx
8 DIN912-M8 x 20-A2-70 03045111-xx
Brief Description
Gantry Carrier Plate for SX1/SX2 [03012160-xx] Tools and Equipment Required
Gantry Modularity Portalmodularität 81
2.3 Tools and Equipment Required
▪ Gantry lift [00519813-xx]
▪ Torque wrench (2 – 25 Nm) [00376625-xx]
▪ Loctite 241 [02101037-xx]
▪ Prepared case (plastic case with foam insert) containing the following:
CAUTION
TÜV (Technical Control Board)
The gantry lift must be tested by the TÜV (Technical Control Board) every two years.
Prepared case
The case is configured differently depending on the ma-
chine type
1. Trailing cable protective foil
2. Buffer stop (2x)
3. Trailing cable mount
4. Pneumatic hose plug (4x)