00196626-06_AI_Portalmodularitaet_SX12_de_en - 第86页
Fitting the Gantry Preparations at the Machine Preparing the Trailing Cable 86 Gantry Modularity Portalmodularität Loosening the trailing cable ► Loose the fixture sc rew (1) on the holder (2) . ► Carefully disconnec t t…
Fitting the Gantry
Preparing the Trailing Cable Preparations at the Machine
Gantry Modularity Portalmodularität 85
3.2.2 Preparing the Trailing Cable
Overview
The trailing cable (1) is packed in a black plastic case and
fixed to a holder (2).
Fitting the Gantry
Preparations at the Machine Preparing the Trailing Cable
86 Gantry Modularity Portalmodularität
Loosening the trailing cable
► Loose the fixture screw (1) on the holder (2).
► Carefully disconnect the trailing cable (3) from its
holder.
CAUTION!
Take care when handling the trailing cable!
Take care not to damage the foil or the trailing cable.
► Place the holder and the fixture screw in the "Pre-
pared case" for fitting back into place later on.
► Take the trailing cable (1) and place it carefully to-
wards the front, into the machine.
Fitting the Gantry
The Gantry Lift Gantry Preparations
Gantry Modularity Portalmodularität 87
3.3 Gantry Preparations
The gantry is packed in a transportation crate. You need the gantry lift to transport the gantry.
3.3.1 The Gantry Lift
The gantry lift is needed for transportation and assembly purposes. Also observe the following instruc-
tions:
WARNING
The gantry may only be transported with the help of the gantry lift.
WARNING
Observe the manufacturer's operating guide!
Please consult the operating guide supplied for details of how to handle the gantry lift and for
all safety-relevant aspects. Observe the instructions therein.
► Observe the safety instructions in the manufacturer's operating guide.
► Observe all safety instructions in this assembly guide when transporting and assembling
the gantry.
WARNING
Verification
► The operator is obligated to check the lifting assistance for visible damage at least once at
shift start or in case of an abnormality, anomaly, event and to give notice of such damage
immediately.
WARNING
Brake, wheels
► Lock the wheels by pushing the brake rod down/forward as far as possible before loading
or unloading the lifting assistance.
► Lock the foot brake after every moving procedure and/or after arriving the required position
in order to prevent inadvertent rolling of the lifting assistance. Release the brake before
moving it again.