00196626-06_AI_Portalmodularitaet_SX12_de_en - 第92页
Fitting the Gantry Gantry Preparations Locking and T ransporting the Gantry Carrier 92 Gantry Modularity Portalmodularität Locking the gantry carrier correctly Securing the gantry in the transportation crate ► Check that…
Fitting the Gantry
Locking and Transporting the Gantry Carrier Gantry Preparations
Gantry Modularity Portalmodularität 91
3.3.3 Locking and Transporting the Gantry Carrier
Move the gantry lift to the gantry
Locking the gantry carrier
► Move the gantry carrier plate (2) for the gantry lift over
the gantry carrier locks (3). The groove (1) must be
able to engage with the two locking plates (3).
► Lower the gantry lift so that the gantry carrier plate
can slide into the locks (4).
► Move the lift only so far down that the locking lever (5)
can be closed.
► Press the lock (4) back and pull (1) the handle (2) of
the lock upwards.
⇨ The lever (3) will engage. The spring on the lock (4)
secures the locking mechanism.
Fitting the Gantry
Gantry Preparations Locking and Transporting the Gantry Carrier
92 Gantry Modularity Portalmodularität
Locking the gantry carrier correctly
Securing the gantry in the transportation crate
► Check that the lever (2) on the lock (1) has engaged
properly.
► To open, press the lock backwards and then press
the lever downwards. This opens the lock.
► The gantry is fixed with 4 screws (1) in the transpor-
tation crate. Loosen these screws.
CAUTION!
Only transport the gantry with the gantry lift when the
arms are locked!
► Move the gantry lift upwards and carefully lift the gan-
try out of the transportation crate.
NOTICE!
The placement head must be in the center of the gantry.
This ensures that the load is distributed evenly during
transportation.
Fitting the Gantry
Transportation Locks and Tilt Guard Gantry Preparations
Gantry Modularity Portalmodularität 93
3.3.4 Transportation Locks and Tilt Guard
► Swing the green lever upwards and swivel the transportation lock to one side.
► There is another lever at (3). Swing the green lever upwards and remove it.
► Loosen the 2 screws fastening the transportation locks (2) to the head plate in each case and remove
both locks.
Tilt guard on the gantry carrier
The gantry is locked with 3 transportation locks (1) and
(3) at the gantry carrier. In addition, the head plate has
two transportation locks (2) for the placement head.
CAUTION
Docking
► Flap down the transportation lock plates right before the docking.
► Make sure that the gantry does not slide of the gantry carrier during rerailing respectively
derailing and that the tilt guard is suspended in order to hold the gantry in position.
NOTICE
Storing the transportation locks
If the gantry is transported or packed back into the transportation crate, you need to refit the
transportation locks.
► Place the transportation locks in the crate for later usage.
The gantry is also fitted with a tilt guard (1) on the gantry
carrier.
CAUTION!
Tilt guard on the gantry carrier
When the tilt guard is open, the gantry could fall off the
gantry carrier.
Only open the tilt guard once you have hooked the gantry
carrier onto the machine docking unit.