00198596-02_JC_3M_C - 第31页
8 3-monthly C&P20 P2/M3 Clean / lubricate the race way and clean the Z-axis jaw and light barrier 6 min 1 / 5 Refer to safety instructions in user manual before commencing Maintenance NOTICE! ESD guidelines are to be…
www.asm-smt.com
8 3-monthly C&P20 P2/M3 Clean / lubricate the race way and clean the Z-axis jaw and light barrier 6 min 1 / 5
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T22, T40, T41
Wear Part: Consumables:
C5, C15, C22
www.asm-smt.com
1 Prepare the multipette. See appendix
"Prepare the multipette".
2 Turn the wheel and adjust 2 µl. 3 Put the head stand in the upright position
and turn the head upside down.
4 Ensure the Z-Axis is moved into the head
before turning the star as otherwise the Z-
Axis jaw can be damaged.
5 Insert a new slightly moistened cleaning
stick between 2 segments (1) so it touches
the raceway (2).
6 Turn the star one full rotation as shown in
the picture pulling the cleaning stick over
the whole race way.
8 3-monthly C&P20 P2/M3 Clean / lubricate the race way and clean the Z-axis jaw and light barrier 6 min 2 / 5
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T22, T40, T41
Wear Part: Consumables:
C5, C15, C22
www.asm-smt.com
7 Turn the cleaning stick by 180° and insert
it again between 2 segments so the tip
touches the raceway.
8 Turn the star one full rotation as shown in
the picture pulling the cleaning stick over
the whole race way.
9 Check the cleaning stick for contamina-
tion.
10 If not OK repeat step 5 to 9. 11 If Ok proceed with next step. 12 Apply 3 x 2 µl slightly shifted on both sides
at the top of a new cleaning stick.