00198596-02_JC_3M_C - 第42页
11 3-monthly C&P20 P2/M3 Mount the holding circuit / orifice plate 8 min 2 / 4 Refer to safety instructions in user manual before commencing Maintenance NOTICE! ESD guidelines are to be followed Tool: T21, T44, T78 W…
11 3-monthly C&P20 P2/M3 Mount the holding circuit / orifice plate 8 min 1 / 4
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T44, T78
Wear Part:
W10, W18
Consumables:
C3, C5, C11, C22
www.asm-smt.com
1 Turn the head upside down. 2 Clean the seating of the holding circuit /
orifice plate.
3 Never use forced air to clean the seating
as otherwise the hoses to the DPs might
go off.
4 To mount the holding circuit (1) proceed
with next step. For the orifice plate pro-
ceed with step 16.
5 Check the seal for dirt and damage. 6 If OK proceed with step 8.
11 3-monthly C&P20 P2/M3 Mount the holding circuit / orifice plate 8 min 2 / 4
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T44, T78
Wear Part:
W10, W18
Consumables:
C3, C5, C11, C22
www.asm-smt.com
7 If not OK replace it with a new one. 8 Place the seal properly on a maintained
holding circuit.
9 Insert the maintained holding circuit with a
seal attached into the star carrier. Take
care of the correct fitting pin position.
10 Fasten the three protruding fixing screws
with a torque of 0.25 Nm.
11 Check the silencer for dirt or damages. 12 If OK proceed with step 14.
11 3-monthly C&P20 P2/M3 Mount the holding circuit / orifice plate 8 min 3 / 4
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T44, T78
Wear Part:
W10, W18
Consumables:
C3, C5, C11, C22
www.asm-smt.com
13 If not OK replace it with a new one. 14 Return the silencer. Ensure the proper
seating by pressing it onto the star carrier.
15 Fasten the screw at the silencer hand-
tight.
16 Mount the orifice plate and the cover. 17 Check the seal for dirt and damage. 18 If Ok proceed with step 20.