00193502-01 - 第21页
Retrofit instructions Short Sleeve 05/2004 Edition 21 4 Retrofit Instructions 4.1 Hardware Modifica tions Set u p th e 2 4/ 32mm fe ed er: 4 Remove the complet e pick u p window of the feed er by ope ning the s crews on …
Retrofit instructions Short Sleeve
05/2004 Edition
20
3.4 Tools and equipment
For the manual change of the sleeves it is useful to wear laboratory gloves. 3
3.5 Parts
3.5.1 Sleeves
3
3.5.2 Feeder modification 24/32mm
The retrofit kit for the 24/32mm SIPLACE feeder (00372544-01) includes following parts: 3
3.5.3 Special Nozzles
3.5.4 Spare parts
00360177-xx Short: Sleeve SP6 short comp.height max 10.7mm
Long: Revolverhead sleeve 6 star, modified for placement of comp. up 10.7mm.
ONLY with RESTRICTION applyable!
PLEASE refer to added manual before use!
00360178-xx Short: Sleeve SP12 short comp.height max 10.7mm
Long: Revolverhead sleeve 12 star, modified for placement of comp. up 10.7mm.
ONLY with RESTRICTION applyable!
PLEASE refer to added manual before use!
00366595-xx Liftingplate Centering
00366596-xx Liftingplate Collar
00366597-xx Pick-up Window
00359806-xx
SOKO nozzle 10mm Ring
For ELKO 10x10.7mm
00365832-xx
SOKO Pipette Diamant Plättchen 5mm Freiätzung
For ELKO 8x10,7mm
00354244S01 Suction plates red for sleeves
Retrofit instructions Short Sleeve
05/2004 Edition
21
4 Retrofit Instructions
4.1 Hardware Modifications
Set up the 24/32mm feeder: 4
Remove the complete pick up window of the feeder by opening the screws on right an left side,
and screw the new modified pick up window. 4
4
4
In the set up will be a standard 24 or 32mm feeder programmed. 4
4
4
4
4
Retrofit instructions Short Sleeve
05/2004 Edition
22
Install the two lifting plates under the collar and the centring plate in front. 4
4
Lifting plate
Lifting plate