00192790-01 - 第52页

2 PCB Camera Multicolor (Option) User Manual SIPLACE S-25 HM / HS-50 2.5 SITEST: PCB Camera Multicolor (Option) Software Version SC.502.xx 11/00 I ssue 52

User Manual SIPLACE S-25 HM / HS-50 2 PCB Camera Multicolor (Option)

Software Version SC.502.xx 11/00 Issue 2.5 SITEST: PCB Camera Multicolor (Option)

Å In the menu "PCB functions" select the button "PCB camera" of gantry 2 or 3 or 4 at the HS-

50 or gantry 2 at S-25 HM.

One after the other, perform the above-described operation for these PCB cameras Multicolor.

NOTE:

If you would like to check the IR illumination levels too, perform the above-described operation in

a like manner for these levels also. Place a white sheet of paper under the camera. As a check,

switch over to the vision screen in each case.



Å If you would then like to look at a specific position on the vision screen with the camera(s) or

to determine their precise X-Y position, change to the menu "Teach the PCB camera" in the

basic view.

Å Carry out the additional steps as described in User Manual SC V502.xx under "Teach the

fiducials".

Å After the illumination test, check the "focus of camera / thickness of substrate" (Section 2.4.2)

and then set the illumination at the station for the substrate to be placed currently (see Section

2.2.3).

2 PCB Camera Multicolor (Option) User Manual SIPLACE S-25 HM / HS-50

2.5 SITEST: PCB Camera Multicolor (Option) Software Version SC.502.xx 11/00 Issue