Vakuumtooling an HS60 - 第60页
2 Assembly instructions Special design Va cuum tooling SIPLACE H S-60 Special design 10/2006 Edition 60 : Put the cover onto the light barrier as shown at the picture belo w and mount the light barrier back to its origin…
Special design 2 Assembly instructions Special design Vacuum tooling SIPLACE HS-60
10/2006 Edition
59
2.11 Installation of the cover for the laser light barrier
(option)
For very thin PCB’s (<0,3mm) the diffusion of the laser beam is to much and the PCB cant be de-
tected. With the cover this effect will be improved. 2
2
2
: Remove the two screws on the light barrier to remove the light barrier.
2
Cover
Laser light barrier
2 Assembly instructions Special design Vacuum tooling SIPLACE HS-60 Special design
10/2006 Edition
60
: Put the cover onto the light barrier as shown at the picture below and mount the light barrier
back to its original place with the two screws.
2
2
2
2
Laser light barrier
Cover