CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第12页

在线预览 CP45FVNEO Maintenance Reference (Eng, Ver3).pdf PDF 文档。

Table of Contents

7.2. Inspection of the Controller .............................................................7-2

7.2.1. Inspection of the Controller Rack......................................................7-2

7.2.2. Inspection of the Rack Part...............................................................7-2

7.3. Inspection of Control Board............................................................. 7-7

7.3.1. CAN Master Board............................................................................7-9

7.3.2. Head Control Board ........................................................................7-10

7.3.3. Conveyor Control Board .................................................................7-13

7.3.4. Feeder Control Board .....................................................................7-17

7.3.5. Illumination Control Board – Flying / Stage Camera.......................7-19

7.4. Inspection of the Motor Part.......................................................... 7-21

7.4.1. X-axis..............................................................................................7-21

7.4.2. Y-axis..............................................................................................7-21

7.4.3. Z1~Z6, S, W axis ............................................................................7-21

7.4.4. R1/2, R3/4, R5/6 axis (THETA1, THETA2, THETA3).....................7-21

7.5. Board Jumper Setting ...................................................................7-22

7.6. AC Servo Driver Digital Switch Setting .........................................7-26

7.7. R-Axis Step Motor Driver (20,000 pulse Fixing)............................ 7-26

7.8. Conveyor Step Motor Driver(1,600 pulse Fixing) .......................... 7-27

7.9. Motor troubleshooting ................................................................... 7-28

Preface

We are grateful to you for buying the Component Placer (hereinafter referred to as the

"machine") manufactured by Samsung Techwin Co., Ltd.

A Component Placer is a machine that picks a component from a component supply

device such as feeders and places the component on the supplied PCB.

This machine has high speed driving area, vacuum pressure operated device, and high

voltage power area. If the machine is not properly operated, safety hazards may serious

injury or death.

The user here includes personnel involved in software programming, installation,

maintenance, and repair of standard system hardware and supply devices such as feeders.

Before operating this machine

 Before operating this machine, please read this manual and understand its contents.

Please keep this manual near the machine at all times so that it can be referred to as

necessary.

 People who have not received training on this machine should not handle it.

 Samsung also provides a training program for operating this machine. For details,

please contact the local agent designated by Samsung Techwin Co., Ltd.

 To assure safety in the operation and maintenance of the machine, it is very important

for the user to know the location of potential safety hazard. Please refer to “Safety

Precaution (page iii)” for more information.

 If the user modifies the machine without prior consent of Samsung Techwin Co., Ltd.

or repairs it in a manner not stated in this manual, the safety assurance features of the

machine might be seriously affected.

 Never attempt to modify or repair the machine in a manner not approved by Samsung

Techwin Co., Ltd.

Samsung Techwin Co., Ltd.

Semi-conductor Systems business division

(

http://www.samsung-smt.com)

STS Co., Ltd.

The Representative C/S Company

DongBang Rental B/D 3F, 333-1, Sangdaewon1-dong, Joongwon-gu, Sungnam-shi,

Gyeonggi-do, Republic of Korea (Post Code: 462-807)

Tel: +82-31-743-6500, 6732~4

Fax: +82-31-743-6784