CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第44页
Samsung Component Placer CP45NEO Series Maintenance Refer ence 2.4. Feeder St ation Cleaning Inspection Check visually if there is chip or forei gn matter on the feeder station surface. These may cause pickup error by di…
Daily Inspection
2-9
Warning
After clicking the “Motor Free” button on the teaching box,
click the “Stop” and “Reset” buttons on the front operation
panel. Conduct inspection while the motor power supply is
turned off.
Wipe the surface of the mirror with an alcohol-soaked clean cloth from the cleaning
kit, and then buff with a clean cloth.
Clean Cloth
Alcohol
Direction of scrubbing
Samsung Component Placer CP45NEO Series Maintenance Reference
2.4. Feeder Station Cleaning
Inspection
Check visually if there is chip or foreign matter on the feeder station surface. These may
cause pickup error by distorting the pickup point when setting up the feeder.
Solution
Feeder Station uppe
r
Feeder Slot
Using the supplied brush , remove the chip or foreign matter on the feeder slot.
Using the
vacuum cleaner, remove the chip or foreign matter on the feeder station
upper surface and feeder slot.
2-10
Daily Inspection
2-11
2.5. Stage Camera Cleaning
2.5.1. Cover Glass
Inspection
Perform visual inspection to determine whether there is any dust or foreign matter on the
cover glass of the stage camera, which can cause error when the camera recognizes a
component.
<Nomal Stage Camera Vision Image> <Abnormal Stage Camera Vision Image>
Solution
Put the machine in a motor-free state by pressing the motor-free button of the
teaching box.
Warning
After clicking the “Motor Free” button on the teaching box,
click the “Stop” and “Reset” buttons on the front operation
panel. Conduct inspection while the motor power supply is
turned off.
Separate the cover glass by removing the cover glass press after unscrewing the 2