CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第70页

Samsung Component Placer CP45NEO Series Maintenance Refer ence Caution Washing the cooling fan fil ter with water may cause damage to the filter by making it harden. Be sure that clean i n th determined methord.  In cas…

Weekly Inspection

3-19

 If any problems still occur, contact our designated C/S company (STS) and local

agent.

3.1.8. Cover Cooling Fan

Inspection

Check if the filter of the cooling fan installed on the left cover of the machine is

contaminated. Otherwise, It may cause the error of the electronic device.

Solution

Remove the filter covers from the front and rear of the machine using a “+” shaped

screwdriver, separate the filter, and clean with vacuum cleaner.

 Remove the covers on the front and rear of the machine by unscrewing four bolts on

each cooling fan filter cover using a “+” shaped screwdriver.

Cooling Fan Filter Cove

 Open the cooling fan filter cover, remove the filter, and clean it with vacuum cleaner.

The direction to open Cooling

Fan Filter Cover

Cooling Fan Filte

Cover Out Side

Cooling Fan Filter

Cover Inner Side

Cooling Fan Filte

Samsung Component Placer CP45NEO Series Maintenance Reference

Caution

Washing the cooling fan filter with water may cause damage

to the filter by making it harden. Be sure that clean in th

determined methord.

 In case the cover cooling fan does not operate, please contact our customer

satisfaction company (STS) or local agent.

3.1.9. Electric Device

Inspection

 Check abrasive wear in each area of the device.

 Check if the machine generates errors when the switch is operated.

 Check if the corresponding input and output of the MMI IO window runs properly.

(Emergency Switch, Door Switch)

 Check if the power is turned off in the machine when the main power switch is turned

off.

Solution

 Contact our local agent for service when severe abrasive wear is present or the

machine does not work properly.

Warning

Before checking abrasive wear, be sure to turn off power,

lock, and check.

3.2. Monthly Inspection

3.2.1. Head Section

Check the state of contamination and operation over all of the head parts.

3.2.1.1. Coil Tube

Inspection

Check if there is any twist or abnormal air leakage by wear in the coil tube connecting the

head assembly and air module.

3-20

Weekly Inspection

3-21

Solution

Head Air Module

Pressure Gage

Coil Tube

Linking part of Coil Tube

 Operate the teaching box to move the head assembly to the front side as far as

possible and click the motor free button.