00197569-01_MM_DLM34_Kunde_en - 第16页
Minor Maintenance Maintenance Tasks for DLM 3.1.3 Preparatory Steps 16 Maintenance Manual SIPLACE Placement Heads DLM3/DLM4 See also 3.2.2 Too ls, Consumab les, Spare and Wear Parts [ ➙ 26] 3.1.3 3 . 1 . 3 P r e p a …
Minor Maintenance
3.1.1 Maintenance Intervals Maintenance Tasks for DLM
Maintenance Manual SIPLACE Placement Heads DLM3/DLM4 15
3
3 Minor Maintenance
Minor Maintenance
3.1
3.1 Maintenance Tasks for DLM
Maintenance Tasks for DLM
3.1.1
3.1.1 Maintenance Intervals
Maintenance Intervals
5000 - Minor - DLM C&P6/12
3.1.2
3.1.2 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
NOTICE
Differences between the heads
The instructions apply in principle to all DLM variants from DLM3 onwards.
Any differences will be explicitly indicated.
Maintenance Tasks
DLM
Duration
[min]
CP6/12
Each
week
Every 3
months
Every 6
months
Every 12
months
Removing the Valve Plungers 2/4 X
Cleaning the Valve Casings 1/2 X
Cleaning the Valve Plungers 3/6 X
Greasing the Valve Plungers 3/6 X
Inserting the Valve Plungers 2/4 X
Replacing the Sleeves 3/5 X
Checking, Cleaning and Greasing the Sleeves 20/40 X
Consumables Item no.
Interflon Fin Grease 03020782- xx
Protective latex gloves 00372972- xx
Cotton gloves, size 8 00359087- xx
Ethanol
Isopropanol – IPA can be used as an alternative.
Microtips medium precision applicators (cleaning sticks) 03020860Sxx
ISOFLEX TOPAS, NCA 52 Tube 50 g 00330850- xx
Lint-free cloths 03082092- xx
Cleaning sticks 00352931- xx
Wear parts Item no.
O-ring for valve plunger 00359382- xx
Suction plate assembly DLM/R light beige 03037984Sxx
C&P6 only:
Valve plunger C&P6 (6 in one pack) 00351500- xx
C&P12 only:
Valve plunger C&P12 (6 in one pack) 00351498- xx
Minor Maintenance
Maintenance Tasks for DLM 3.1.3 Preparatory Steps
16 Maintenance Manual SIPLACE Placement Heads DLM3/DLM4
See also
3.2.2 Tools, Consumables, Spare and Wear Parts [ ➙ 26]
3.1.3
3.1.3 Preparatory Steps
Preparatory Steps
Recommended spare parts Item no.
C&P6 only:
Set of sleeves for 6 seg. head 00116114Sxx
Individual sleeves for 6 seg. head 00352957Sxx
C&P12 only:
Set of sleeves for 12 seg. head 00116113Sxx
Individual sleeves for 12 seg. head 00350588Sxx
Tools Item no.
ESD wriststrap TYP.OK/WRS 00320279- xx
SPIRAL drill cylinder R.1.4 D DIN 338 00092026- xx
SPIRAL drill cylinder R.1.1 D DIN 338 00092020- xx
Plunger maintenance tool 03049689Sxx
Sleeve cleaning device 00377260- xx
NOTICE
Recommendation
The following tasks can be performed to the head when it is fitted in the machine.
► However, you can also remove the head from the machine if you need better access. For
details, refer to the service manual.
Minor Maintenance
3.1.4 Performing Maintenance Tasks Maintenance Tasks for DLM
Maintenance Manual SIPLACE Placement Heads DLM3/DLM4 17
3.1.4
3.1.4 Performing Maintenance Tasks
Performing Maintenance Tasks
3.1.4.1
3.1.4.1 Removing the Valve Plungers
Removing the Valve Plungers
See also
3.1.4.4 Greasing the Valve Plungers [ ➙ 19]
NOTICE
White caps
The white caps on the valve plungers are highly sensitive.
► Handle these caps with care.
► A loose cap can be refitted if it is still intact.
NOTICE
Seg. not airtight
The Segment leaking error message generally indicates a valve plunger that is too loose.
NOTICE
Valve plunger
We recommend that you have a sufficient number of cleaned/new valve plungers available, so
that you just need to replace them during head maintenance.
The actual cleaning of the valve plungers can be performed later on.
► Please refer to section "3.1.4.3 Cleaning the Valve Plunger" [ ➙18].
► Remove the valve plungers (1).