00196014-0102_AI_PCI_KarteAuteRecoveryFunktionX4i_DE EN - 第17页

PCI card 2 Assembly Instructions PCI Card for SIPLACE X4I Auto Recovery Function 12/2007 Edition 17 : Loosen the two screws on the cover to the BoxPC, and swivel it up. 2 CAUTION All work on the open device must be carri…

100%1 / 22
2 Assembly Instructions PCI Card for SIPLACE X4I Auto Recovery Function PCI card
12/2007 Edition
16
: Loosen the fixing screws on the bottom BoxPC (see photograph).
: Detach the cables from the lower BoxPC.
Bottom BoxPC
2 fixing screws on each side
2
2
: Pull out the BoxPC carefully and place it on a flat surface.
2
2
2
2
2
2
2
2
2
PCI card 2 Assembly Instructions PCI Card for SIPLACE X4I Auto Recovery Function
12/2007 Edition
17
: Loosen the two screws on the cover to the BoxPC, and swivel it up.
2
CAUTION
All work on the open device must be carried out by authorized te
chnical personnel only. During
the defect liability period, you are only permitted to upgrade the hardware with memory and
cards. 2
2
CAUTION!
The device contains electronic components that can be damaged by electrostatic discharge.
You must therefore take the necessary precautions
when you open the device. These precautions
are described in the guidelines for components at risk from electrostatic discharge (ESD guide-
lines). 2
2 screws
2
2
: Loosen the screw on the retainer and remove the retainer.
Screw
Retainer
2
2 Assembly Instructions PCI Card for SIPLACE X4I Auto Recovery Function PCI card
12/2007 Edition
18
: Loosen the screw on the blanking plate and pull the plate out.
Screw
Blanking
plate
2
: Insert the AutoRecovery card in place of the blanking plate.
Press it in carefully, then screw it in place.
AutoRecovery card
AutoRecovery card installed
2