4OM-1075-002 - 第130页
Error ID Item Description 080101 Head Rotational #1Axis Origin Encoder origin was not detected. 080102 Head Rotational #1Axis Origin Origin sensor (slide) was not detected. 080103 Head Rotational #1Axis Origin Origin sen…
Error ID Item Description
07060d Head Up/Down #2 Axis Servo Error System error.
07060e Head Up/Down #2 Axis Servo Error Invalid command.
07060f Head Up/Down #2 Axis Servo Error Error1 (No Factor)
070610 Head Up/Down #2 Axis Servo Error Error2 (No Factor)
070611 Head Up/Down #2 Axis Servo Error Emergency stop (EXT1) when servo on
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
070701 Head Up/Down #2 Axis Interlock Servo alarm (Interlock board).
070702 Head Up/Down #2 Axis Interlock Pass line sensor was detected.
070703 Head Up/Down #2 Axis Interlock Head push sensor was detected.
070704 Head Up/Down #2 Axis Interlock Head push sensor was detected. (On Producting
PCB)
070705 Head Up/Down #2 Axis Interlock Head push sensor was detected. (Parts Pickup
Position )
(Cause 1) The head might be pushed too excessively.
(Remedy 1) Zero the L axis and pull out the feeder.
Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-002 2-41 AHB01ETRP
Error ID Item Description
080101 Head Rotational #1Axis Origin Encoder origin was not detected.
080102 Head Rotational #1Axis Origin Origin sensor (slide) was not detected.
080103 Head Rotational #1Axis Origin Origin sensor (slide) and Limit error has been de-
tected.
080104 Head Rotational #1Axis Origin Feedback value is indefinite.
080105 Head Rotational #1Axis Origin Z1 axis is not at origin.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-001 2-41-1 AHB01ETRP
Error ID Item Description
080201 Head Rotational #1Axis Timing Task has not been completed unable to continue.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
080301 Head Rotational #1Axis Data The driver data was detected outside of the possible
range.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
080401 Head Rotational #1Axis Limit (+) Limit error has been detected.
080402 Head Rotational #1Axis Limit (-) Limit error has been detected.
(Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc.
The sensor may be defective.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
080502 Head Rotational #1Axis Servo Alarm Parameter breakdown.
080503 Head Rotational #1Axis Servo Alarm Main circuit encoder error.
080504 Head Rotational #1Axis Servo Alarm Parameter setting error.
080505 Head Rotational #1Axis Servo Alarm Combination error.
080510 Head Rotational #1Axis Servo Alarm Overcurrent or heat sink overheated.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0107-001 2-42 AHB01ETRP