4OM-1075-002 - 第158页
Error ID Item Description 1 10401 T V # 1 Axis Limit 1 10402 T V # 1 Axis Limit (Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc. The sensor may be defective. (Remedy 1) Zero all axe…
Error ID Item Description
110107 TV #1 Axis Origin Zeroing not completed within specified time. (5204)
110108 TV #1 Axis Origin Pallet installation error detected.;BPH504/505 (5401)
110109 TV #1 Axis Origin Pallet detected. (5402)
11010a TV #1 Axis Origin Operation not completed normally. (5403)
11010b TV #1 Axis Origin Zeroing not completed within specified time. (5404)
11010c TV #1 Axis Origin Pallet not detected. (5501)
11010d TV #1 Axis Origin Pallet installation error not detected within specified
time. (5502)
11010e TV #1 Axis Origin Pallet installation error detected before destination.
(5601)
11010f TV #1 Axis Origin Pallet not detected. (5701)
110110 TV #1 Axis Origin Operation not completed normally. (5702)
110111 TV #1 Axis Origin Operation not completed within specified time. (5703)
110114 TV #1 Axis Origin Rack shutter not closed within specified time. (5704)
110115 TV #1 Axis Origin Origin detected after end of zeroing operation.
(BPH511) (5901)
110117 TV #1 Axis Origin Operation not completed normally. (5902)
110118 TV #1 Axis Origin The limit sensors (BPH513) detected the limit. (5903)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
110201 TV #1 Axis Timing
110301 TV #1 Axis Data
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-66 AHB01ETRP
Error ID Item Description
110401 TV #1 Axis Limit
110402 TV #1 Axis Limit
(Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc.
The sensor may be defective.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
110601 TV #1 Axis Interlock Driver Alarm
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service per-
sonnel for the remedy.
110602 TV #1 Axis Interlock Pick-Up Error Detection (Upper, 16.5 mm or more);
BPH518
110603 TV #1 Axis Interlock Pick-Up Error Detection (Lower, 8.0 mm or more);
BPH517
(Cause 1) See the explanation.
(Remedy 1) Remove the mispicked component on the tray.
110604 TV #1 Axis Interlock Pass-line Interlock
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-004 2-67 AHB01ETRP
Error ID Item Description
110605 TV #1 Axis Interlock Pick-Up Error Detection (Upper, 28.0 mm or more) ;
BPH522
110606 TV #1 Axis Interlock
110607 TV #1 Axis Interlock
110608 TV #1 Axis Interlock
110609 TV #1 Axis Interlock
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
111001 TV #1 Axis Precheck Zeroing not completed within specified time.
111002 TV #1 Axis Precheck Pallet not drawn normally.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service per-
sonnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-001 2-67-1 AHB01ETRP