4OM-1075-002 - 第159页
Error ID Item Description 1 10605 T V # 1 Axis Interlock Pick-Up Error Detection (Upper , 28.0 mm or more) ; BPH522 1 10606 T V # 1 Axis Interlock 1 10607 T V # 1 Axis Interlock 1 10608 T V # 1 Axis Interlock 1 10609 T V…
Error ID Item Description
110401 TV #1 Axis Limit
110402 TV #1 Axis Limit
(Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc.
The sensor may be defective.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
110601 TV #1 Axis Interlock Driver Alarm
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service per-
sonnel for the remedy.
110602 TV #1 Axis Interlock Pick-Up Error Detection (Upper, 16.5 mm or more);
BPH518
110603 TV #1 Axis Interlock Pick-Up Error Detection (Lower, 8.0 mm or more);
BPH517
(Cause 1) See the explanation.
(Remedy 1) Remove the mispicked component on the tray.
110604 TV #1 Axis Interlock Pass-line Interlock
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-004 2-67 AHB01ETRP
Error ID Item Description
110605 TV #1 Axis Interlock Pick-Up Error Detection (Upper, 28.0 mm or more) ;
BPH522
110606 TV #1 Axis Interlock
110607 TV #1 Axis Interlock
110608 TV #1 Axis Interlock
110609 TV #1 Axis Interlock
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
111001 TV #1 Axis Precheck Zeroing not completed within specified time.
111002 TV #1 Axis Precheck Pallet not drawn normally.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service per-
sonnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-001 2-67-1 AHB01ETRP
Error ID Item Description
111003 TV #1 Axis Precheck Safty relay off.; K504
111004 TV #1 Axis Precheck Safty relay off.; K502
111005 TV #1 Axis Precheck Pallet installation error detected.; BPH504/505
111006 TV #1 Axis Precheck Rack shutter opened.; BPS502/504
111007 TV #1 Axis Precheck Pallet chuck opened.; BPS512
111008 TV #1 Axis Precheck L1 Axis Zeroing not completed
111009 TV #1 Axis Precheck
11100a TV #1 Axis Precheck
11100b TV #1 Axis Precheck Pallet detected.; BPS514
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service per-
sonnel for the remedy.
11100c TV #1 Axis Precheck
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Remove the mispicked component on the tray.
11100d TV #1 Axis Precheck
11100e TV #1 Axis Precheck
11100f TV #1 Axis Precheck Incorrect No. of Drawing Step
112001 TV #1 Axis Precheck
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-003 2-68 AHB01ETRP