4OM-1075-002 - 第188页
Error ID Item Description 210601 Feeder Base #2 Interlock Component Pick-Up Error Detection 2 210602 Feeder Base #2 Interlock Lifted Suppressor Detection 2 210603 Feeder Base #2 Interlock 210901 Feeder Base #2 Fuse blew …
Error ID Item Description
200201 Feeder Base #1 Unit Connection Error A feeder was removed during automatic operation.
200202 Feeder Base #1 Unit Connection Error No feeder was set ready at starting.
200203 Feeder Base #1 Unit Connection Error Two or more tape feeders were removed.
200301 Feeder Base #1 Transfer Cylinder Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
200601 Feeder Base #1 Interlock Component Pick-Up Error Detection
200602 Feeder Base #1 Interlock Lifted Suppressor Detection
200603 Feeder Base #1 Interlock Maintenance Opening A (Area Sensor) Detection
200901 Feeder Base #1 Fuse blew.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
210201 Feeder Base #2 Unit Connection Error A feeder was removed during automatic operation.
210202 Feeder Base #2 Unit Connection Error No feeder was set ready at starting.
210203 Feeder Base #2 Unit Connection Error Two or more tape feeders were removed.
210301 Feeder Base #2 Transfer Cylinder Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-003 2-95 AHB01ETRP
Error ID Item Description
210601 Feeder Base #2 Interlock Component Pick-Up Error Detection 2
210602 Feeder Base #2 Interlock Lifted Suppressor Detection 2
210603 Feeder Base #2 Interlock
210901 Feeder Base #2 Fuse blew.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
220201 Feeder Base #3 Unit Connection Error A feeder was removed during automatic operation.
220202 Feeder Base #3 Unit Connection Error No feeder was set ready at starting.
220301 Feeder Base #3 Transfer Cylinder Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
220601 Feeder Base #3 Interlock Component Pick-Up Error Detection
220602 Feeder Base #3 Interlock Lifted Suppressor Detection
220603 Feeder Base #3 Interlock Maintenance Opening B (Area Sensor) Detection
220901 Feeder Base #3 Fuse blew.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-96 AHB01ETRP
Error ID Item Description
230201 Feeder Base #4 Unit Connection Error A feeder was removed during automatic operation.
230202 Feeder Base #4 Unit Connection Error No feeder was set ready at starting.
230203 Feeder Base #4 Unit Connection Error Two or more tape feeders were removed.
230301 Feeder Base #4 Transfer Cylinder Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
230601 Feeder Base #4 Interlock Component Pick-Up Error Detection
230602 Feeder Base #4 Interlock Lifted Suppressor Detection
230603 Feeder Base #4 Interlock
230901 Feeder Base #4 Fuse blew.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
4f0101 Program Error Error in Sequence Controller! Operation Not Secured
4f0201 Program Error Error in Polling Task (CPU2)! Operation Not Secured
4f0202 Program Error Error in Polling Task (CPU3)! Operation Not Secured
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-004 2-97 AHB01ETRP