4OM-1075-002 - 第217页

Error ID Item Description 6d0101 P .E.C. Recognition Camera & Beam Recognition error occurred during teaching. Offset 6d0102 P .E.C. Recognition Camera & Beam Checker mark not recognized on JIG P .C.B. Offset 6d0…

100%1 / 299
Error ID Item Description
6c0701 Head Operation Error An error occurred during pick-up a component.
6c0702 Head Operation Error An error occurred during placeing a component.
6c0703 Head Operation Error
6c0704 Head Operation Error
6c0705 Head Operation Error
6c0706 Head Operation Error
6c0707 Head Operation Error
6c0801 NC-Axis Operation Error An logical error occurred for NC-axis.
6c0802 NC-Axis Operation Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-001 2-108-1 AHB01ETRP
Error ID Item Description
6d0101 P.E.C. Recognition Camera & Beam Recognition error occurred during teaching.
Offset
6d0102 P.E.C. Recognition Camera & Beam Checker mark not recognized on JIG P.C.B.
Offset
6d0103 P.E.C. Recognition Camera & Beam Checker mark not recognized on JIG P.C.B.
Offset
6d0104 P.E.C. Recognition Camera & Beam Checker mark not recognized on JIG P.C.B.
Offset
6d0105 P.E.C. Recognition Camera & Beam Checker mark not recognized on JIG P.C.B.
Offset
6d0201 Component Recognition Camera Recognition error occurred during teaching.
(Fixed) Magnification
6d0301 Component Recognition (Fixed) Recognition error occurred during teaching.
Camera Offset
6d0302 Component Recognition (Fixed) Recognition error occurred during teaching.
Camera Offset
6d0303 Component Recognition (Fixed) Recognition error occurred during teaching.
Camera Offset
6d0304 Component Recognition (Fixed) Recognition error occurred during teaching.
Camera Offset
6d0305 Component Recognition (Fixed) Recognition error occurred during teaching.
Camera Offset
6d0306 Component Recognition (Fixed) Recognition error occurred during teaching.
Camera Offset
6d0401 Head Rotational Center Offset JIG component not recognized through component
recognition camera.
6d0402 Head Rotational Center Offset JIG component not recognized through component
recognition camera.
6d0403 Head Rotational Center Offset JIG component not recognized through component
recognition camera.
6d0404 Head Rotational Center Offset JIG component not recognized through component
recognition camera.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-004 2-109 AHB01ETRP
Error ID Item Description
6d0501 NC-Axis Offset JIG component not recognized through component
recognition camera.
6d0502 NC-Axis Offset JIG component not recognized through component
recognition camera.
6d0503 NC-Axis Offset JIG component not recognized through component
recognition camera.
6d0550 NC-Axis Offset Sensor is ON.
6d0551 NC-Axis Offset Sensor is OFF. (1)
6d0552 NC-Axis Offset Sensor is OFF. (2)
6d0553 NC-Axis Offset Sensor is OFF. (3)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
6d0601 Component Recognition Camera Recognition error occurred during teaching.
(Movable) Magnification
6d0701 Component Recognition Camera JIG component not recognized through component
(Movable) Offset recognition camera.
6d0702 Component Recognition Camera JIG component not recognized through component
(Movable) Offset recognition camera.
6d0801 Head Rotation Offset JIG component not recognized through component
recognition camera.
6d0901 Component Recognition Camera Recognition error occurred during teaching.
(Movable) Position Offset
6d0902 Component Recognition Camera
(Movable) Position Offset
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-003 2-109-1 AHB01ETRP