4OM-1075-002 - 第234页
Error ID Item Description 700001 Tray 2 Operation Error The elevator stopped running in an error condition. 700002 Tray 2 Operation Error The traverse stopped running in an error condition. 700003 Tray 2 Operation Error …
Error ID Item Description
6f162e Tray 1 Feeder Zeroing Error
6f162f Tray 1 Feeder Zeroing Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Remove the mispicked component on the tray.
6f1701 Tray 1 Feeder Zeroing Error A palllet was detected at the elevator origin.
(BPH514) (5001)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check Sensor BPH514.
6f1901 Tray 1 Feeder Zeroing Error The L1 axis might be located lower than the pass
line.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) ) Zero the L1 axis.
6f1902 Tray 1 Feeder Zeroing Error The L2 axis might be located lower than the pass
line.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero the L2 axis.
3.3 Error IDs and Remedial Procedures
0206-001 2-1 13-9 AHB01ETRP
Error ID Item Description
700001 Tray 2 Operation Error The elevator stopped running in an error condition.
700002 Tray 2 Operation Error The traverse stopped running in an error condition.
700003 Tray 2 Operation Error Rack Shutter Opening Out of Time Limit
700004 Tray 2 Operation Error Rack Shutter Closing Out of Time Limit
700005 Tray 2 Operation Error Pallet Chuck Opening Out of Time Limit
700006 Tray 2 Operation Error Pallet Chuck Closing Out of Time Limit
700101 Tray 2 System Error Tray No. Error
700102 Tray 2 System Error Feeder No. Error
700103 Tray 2 System Error Step No. Error
700104 Tray 2 System Error
700105 Tray 2 System Error
700106 Tray 2 System Error
700107 Tray 2 System Error
700108 Tray 2 System Error
700109 Tray 2 System Error
70010a Tray 2 System Error
70010b Tray 2 System Error
70010c Tray 2 System Error
70010d Tray 2 System Error
70010e Tray 2 System Error
70010f Tray 2 System Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-001 2-1 13-10 AHB01ETRP
Error ID Item Description
700201 Tray 2 Precheck Error L1 Axis Zeroing not completed
700202 Tray 2 Precheck Error L2 Axis Zeroing not completed
700203 Tray 2 Precheck Error TV2 Axis Zeroing not completed
700204 Tray 2 Precheck Error EV2 Axis Zeroing not completed
700205 Tray 2 Precheck Error
700206 Tray 2 Precheck Error
700207 Tray 2 Precheck Error
700601 Tray 2 Interlock
700602 Tray 2 Interlock
700603 Tray 2 Interlock
700604 Tray 2 Interlock
700605 Tray 2 Interlock
701001 Tray 2 Supply Operation Error
701002 Tray 2 Supply Operation Error Drawout Tray Step No. Mismatch (Returning)
701003 Tray 2 Supply Operation Error Drawout Tray Step No. Mismatch (Returning)
701004 Tray 2 Supply Operation Error Illegal Operation Mode (System)
701005 Tray 2 Supply Operation Error Indefinite TV-Axis Position
701101 Tray 2 Pallet Returning Error Elevator Moving Position Error
701102 Tray 2 Pallet Returning Error Elevator Operation Error
701103 Tray 2 Pallet Returning Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-001 2-113-11 AHB01ETRP