4OM-1075-002 - 第268页

Error ID Item Description 01 39 2 51001 The camera is canceled due to the parameter set ----- for "view range set". 01 39 2 51002 The specified visual field is not available. ----- 01 39 2 51003 An unavailable …

Error ID Item Description

01 39 2 14021 "Polarity Inspection Position" Out of "Mold Size" -----

01 39 2 14022 "Elctd # of Rows or # of Cols" in Elctd Group 1" -----

is Not Sufficient

01 39 2 14023 "Elctd # of Rows or # of Cols" in Elctd Group 2" -----

is Not Sufficient

01 39 2 14024 "Elctd # of Rows or # of Cols" in Elctd Group 3" -----

is Not Sufficient

01 39 2 14025 "Elctd # of Rows or # of Cols" in Elctd Group 4" -----

is Not Sufficient

01 39 2 14026 "Elctd # of Rows or # of Cols" in Elctd Group 5" -----

is Not Sufficient

01 39 2 14027 "Elctd # of Rows or # of Cols" in Elctd Group 6" -----

is Not Sufficient

01 39 2 14028 Electrode Position Superposed in Different -----

Electrode Group!

01 39 2 21001 Failed in Automatic Selection of Algorithm for -----

Lealess Components.

01 39 2 21002 Failed in Automatic Selection of Algorithm for -----

Leaded Components.

01 39 2 21003 Failed in Automatic Selection of Algorithm for -----

Area Array.

01 39 2 21004 Failed in Automatic Selection of Algorithm for -----

Cylindrical Components.

01 39 2 21005 Failed in Automatic Selection of Algorithm for -----

Square Components.

01 39 2 21006 Failed in Automatic Selection of Algorithm for -----

Deformed Components.

01 39 2 21007 Failed in Automatic Selection of Algorithm for ICs. -----

01 39 2 21008 Failed in Automatic Selection of Algorithm for -----

Connectors.

01 39 2 21009 Failed in Automatic Selection of Algorithm for -----

Leaded Components.

01 39 2 21010 Failed in Automatic Selection of Algorithm for -----

BGA Components.

(Cause 1) Wrong parameters are set.

(Remedy 1) Set correct parameters.

0206-002 2-130 AHB01ETRP

4.3 Recognition Error IDs and Remedial Procedures

Error ID Item Description

01 39 2 51001 The camera is canceled due to the parameter set -----

for "view range set".

01 39 2 51002 The specified visual field is not available. -----

01 39 2 51003 An unavailable lighting mode is selected. -----

01 39 2 51006 The mechanical grip nozzle can not be used on -----

the movable camera.

01 39 2 52001 Device Size is too small. -----

01 39 2 52002 Device Size is too big. -----

01 39 2 52003 The component cannot be recognized in the -----

"Back Lighting" system because the component

size is too big.

01 39 2 52004 The movable camera cannot work for recognition

because the component is too thick.

01 39 2 52005 The component cannot be recognized, using the -----

specified algorithm because the square compo-

nent is selected.

01 39 2 52006 The number of effective corners is too small. -----

01 39 2 52007 No effective combination of edges is found. -----

01 39 2 52008 "# of Linear Edges" is improper. -----

01 39 2 52009 The specified directions of linear edges are all -----

paralle.

01 39 2 52010 "Linear Width" is too small.

01 39 2 53001 "Lead Width" is too small. -----

01 39 2 53002 "Lead Length" is too short. -----

01 39 2 53003 "Full Length" is too short. -----

01 39 2 53004 "Lead Pitch" is too narrow. -----

01 39 2 53005 The lead-to-lead distances are too short. -----

01 39 2 53006 "# of Leads" in "Lead Group" is too small. -----

(Cause 1) Wrong parameters are set.

(Remedy 1) Set correct parameters.

0308-003 2-131 AHB01ETRP

4.3 Recognition Error IDs and Remedial Procedures

Error ID Item Description

01 39 2 53007 The total of "# of Leads" (lead data) is too large. -----

01 39 2 53008 The total of "# of Leads" (lead data) is too small. -----

01 39 2 53009 An unrecognizable lead shape is selected. -----

01 39 2 53010 The specified type of leads cannot be recognized -----

in the back lighting system.

01 39 2 53011 "Lead Width" is too big.

01 39 2 53012 "Lead Length" is too long.

01 39 2 53013 "Full Length" is too long.

01 39 2 54001 "Elctd Dim" is too small. -----

01 39 2 54002 "Elctd Row or Col Pitch" is too narrow. -----

01 39 2 54003 The electrode-to-electrode distance is too short. -----

(Cause 1) Wrong parameters are set.

(Remedy 1) Set correct parameters.

01 39 3 00005 "Component Library Pickup pos correction X or Y" -----

Data.

(Cause 1) Wrong parameters are set.

(Remedy 1) Set correct parameters.

01 39 3 10001 "Component Library Polarity Component shape" -----

Not Supported!

(Cause 1) The data is not supported.

(Remedy 1) Set the supported data.

0308-003 2-132 AHB01ETRP

4.3 Recognition Error IDs and Remedial Procedures