4OM-1075-002 - 第51页
• • • • • Attachment Procedure (1) Put the new nozzle clamp spring through the pilot pin of the nozzle holder and tighten the shaft with the hex-head wrench. Engage the wrench with both ends of the nozzle holder . At thi…
1.4.2 Replacement of Nozzle Shaft and Nozzle Clamp Spring
••
••
• Detachment Procedure
(1) Engage a wrench with both ends of the nozzle holder such that no
force is applied to the linear guide.
Turn the shaft counterclockwise with the hex-head wrench and de-
tach the shaft from the nozzle clamp spring.
Fig. 4A43-1
(2) Attach new shaft and nozzle clamp spring to the nozzle holder.
Fig. 4A43-2
Wrench
Hex-Head Wrench
Nozzle Holde
r
Shaft
Nozzle Clamp Spring
(Part No.: 630 111 7867)
0308-001 1-35-1 AHB01ETRP
1.4 Maintenance Method
••
••
• Attachment Procedure
(1) Put the new nozzle clamp spring through the pilot pin of the nozzle
holder and tighten the shaft with the hex-head wrench.
Engage the wrench with both ends of the nozzle holder.
At this time, do not apply any force to the linear guide.
Fig. 4A43-3
1.4 Maintenance Method
0308-001 1-35-2 AHB01ETRP
Shaft
Nozzle Clamp Spring
Pilot Pin in Nozzle Holder
1.5 Maintenance Check List
This session describes how to perform the maintenance work periodi-
cally.
Use the tables below as check lists.
Refer to "1.3 Maintenance Spots" for the maintenance of each indi-
vidual spots of the machine.
1.5.1 Daily Maintenance
Table 4A4
1.5 Maintenance Check List
0206-001 1-36 AHB01ETRP
Air Source
Vacuum System
Scrap Box
Component
Storage Box
Feeder Base
X/Y Beam Section
Main Air Pressure
Air Blowing Pressure
Vacuum Pressure
Scrap Box
Upper Surface of
Feeder Base
X-Axis Linear Guide
Y-Axis Linear Guide
1D1
1D2
1D3
1D4
1D5
1D6
1D7
1D8
4A10 Checking
4A11 Checking
4A13 Checking
4A14 Cleaning
4A15 Cleaning
4A16 Cleaning
4A28 Checking
4A29 Checking
-----
-----
-----
-----
-----
-----
-----
-----
Visual Inspection
Visual Inspection
Visual Inspection
-----
-----
Rag
Visual Inspection
Visual Inspection
Maintenance Spots
Description Grease
Cleaning
tools,
Nozzles, etc.
Check
Block Name
No.
Fig.
No.
Detailed Name
Component
Storage Box