00191025-01 - 第107页

SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.6 Error Menu s 5 - 31 5.6. 3.2 Range of Functions for the Line Engineer After e ntering the line eng ineer pass word the fo llowi…

5 Placement SIPLACE 80S/F/G User’s Manual

5.6 Error Menus Edition 12/96 from Software Version SR.009.xx

5 - 30

5.6.3.1 Range of Functions for the Operator

Display errors

To obtain a display of all errors which have occurred use the

cursor keys

to select the menu point "Display

errors". Then press the

Return key

. On the screen the menu "Display errors" described in Section 5.7

(Display functions) will appear.

Abort placement

Use the

cursor keys

to select the menu item "Abort placement" in order to quit the error menu without

placement continuing, and press the

Return key

. The board on the conveyor is transported onto the output

conveyor. Components at the placement head are ejected. The portals are moved into the waiting position.

Continue placement

Use the

cursor keys

to select the menu item "Continue placement" in order for placement to continue and

press the

Return key

. The machine checks whether there is a board on the center conveyor (placement

area) and continues placement. If there is no board in the placement area, a request is issued under menu

item "Action" of the basic menu.

PCB to output conveyor

When the function "PCB to output conveyor" is selected via the cursor keys and the

Return key

, a printed

circuit board on the center conveyor is conveyed onto the output conveyor and left for removal by hand.

Components which have already been picked up remain at the placement head.

PCB to center conveyor

When the function "PCB to center conveyor" is selected via the cursor keys and the

Return key

, a printed

circuit board on the input conveyor is transported onto the center conveyor, stopped and clamped.

Replacing the printed circuit board without losing the components:

●

Using the

cursor keys

position the cursor bar over the menu item "PCB to output conveyor".

Then press the

Return key

The printed circuit board is transferred to the output conveyor and can be removed there. The components

that have been picked up remain at the head.

●

Load a printed circuit board onto the input conveyor. Using the

cursor keys

position the cursor bar over the

menu item "PCB to center conveyor". Then press the

Return key

The printed circuit board is transferred to the center conveyor and clamped.

●

Using the

cursor keys

position the cursor bar over the menu item "Continue placement".

Then press the

Return key

SIPLACE 80S/F/G User’s Manual 5 Placement

Edition 12/96 from Software Version SR.009.xx 5.6 Error Menus

5 - 31

5.6.3.2 Range of Functions for the Line Engineer

After entering the line engineer password the following additional functions are displayed in the transport error

menu:

Cycle mode

Using the

cursor keys

position the cursor bar over the menu item "Cycle mode". Then press the

Return

key

. For each step of the placement sequence you will now need to press the start button.

5.6.4 Track Error Menus 1 and 2

NOTE

After the start key has been pressed the placement head moves out of the feeder area to allow work to be

carried out on the feeders.

The track error menu is shown on the screen when no further mountable component can be found. This

means that a component which cannot be found in the component feeders is passed over. Placement is con-

tinued up until the point where only the components which are still missing need to be placed on the board.

After the track error menu has been processed, the remaining components are placed on the printed circuit

board (Repair run).

Fig. 5.6.3

SI 80 V 9.x

Cluster: TEST

Rüstung :

Display errors

Confirm errors

Machine options

Error

State

Action

Track error 1/2

Abort placement

Display errors

Refill

Error treatment - pick-up error

Continue placement

5 Placement SIPLACE 80S/F/G User’s Manual

5.6 Error Menus Edition 12/96 from Software Version SR.009.xx

5 - 32

5.6.4.1 Range of Functions for the Operator

Display errors

To obtain a display of all errors which have occurred use the

cursor keys

to select the menu point "Display

errors". Then press the

Return key

. The screen displays the menu "Display errors" described in Section

5.7 (Display functions).

Refilling

Use the

cursor keys

to select the menu item "Refill" in order to refill empty component tracks. Then press

the

Return key

. The screen displays the menu "Refill" described in Section 5.4 (Components Handling).

Abort placement

Use the

cursor keys

to select the menu item "Abort placement" in order to quit the error menu without

placement continuing, and press the

Return key

. The board on the conveyor is transported onto the output

conveyor. Components at the placement head are ejected. The portals are moved into the waiting position.

Continue placement

Use the

cursor keys

to select the menu item "Continue placement" in order for placement to continue and

press the

Return key

. The machine continues placement with the components which were missing before

error handling.

5.6.4.2 Range of Functions for the Line Engineer

After entering the line engineer password, the following additional functions are shown in the fiducial errors

menu:

CRDL

Use the

cursor keys

to select the menu item "CRDL" if the track errors were caused by testing errors of the

CRDL tester, and press the

Return key

. The screen displays the menu "CRDL" described in Section 6.3

(Star Head Functions 80 S). Within this menu you can compensate and check the CRDL tester.

Display star nozzle configuration

Use the

cursor keys

to select the menu item "Star nozzle config." if the track errors were caused by

segments being occupied by the wrong nozzles. Then press the

Return key

The screen displays the menu "Star nozzle config." which is described in Section 6.3 (Star Head Functions

80 S). In this menu you can check whether the nozzles occupying the segments are in agreement with the

placement program.

Cycle mode

Using the

cursor keys

position the cursor bar over the menu item "Cycle mode". Then press the

Return

key

. For each step of the placement sequence you will now need to press the start button.

Fill all

After having selected this function with the aid of the cursor keys and launched with the return key all

empty tracks are set full and the corresponding track errors cancelled. For you to be able to implement this

function the refill check in the menu Machine options (see Section 5.3.1) must be switched off.