00191025-01 - 第117页

SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.6 E rror Menus 5 - 41 Fig. 5.6.9 ● With the s pace bar se lect cycle mod e on (X) or cy cle mode off ( ) and confirm thi s select…

5 Placement SIPLACE 80S/F/G User’s Manual

5.6 Error Menus Edition 12/96 from Software Version SR.009.xx

5 - 40

5.6.8 Abort Menu

To access the abort menu, from which placement can be aborted or the cycle mode started, the following

actions need to be performed:

●

Press one of the two stop buttons (red and marked 0) at the input or output conveyor of the machine. The

abort menu is displayed on the screen.

Fig. 5.6.8

●

With the aid of the cursor keys position the cursor bar over the menu item "Continue placement". After

doing so, press the return key.

The placement machine then continues with placement once the start button has been pressed.

●

With the aid of the cursor keys position the cursor bar over the menu item "Abort placement". Following

this, press the return key.

The placement machine ejects the components which are already at the heads and transports the printed

circuit board onto the output conveyor.

●

With the aid of the cursor keys position the cursor bar over the menu item "Cycle mode". Next press the

return key. The following menu screen appears.

SI 80 V 9.x

Cluster: TEST

Display errors

Confirm errors

Machine options

Error

State

Action

Rüstung :

Abort menu

Abort placement

Cycle mode

Continue placement

SIPLACE 80S/F/G User’s Manual 5 Placement

Edition 12/96 from Software Version SR.009.xx 5.6 Error Menus

5 - 41

Fig. 5.6.9

●

With the space bar select cycle mode on (X) or cycle mode off ( ) and confirm this selection with the return

key.

●

For every step of the placement sequence you must now press the start button. The abort menu remains

displayed on the screen.

●