00191025-01 - 第144页

6 Single Functi ons SIPLACE 80S/F/G User’s M anual 6.2 Gantry Functions 80S Edition 07/97 from Software Version SR.010.xx 6 - 12 ● Pre ss the Esc key twice t o quit the m enu. The gantry perfor ms a referenc e run and th…

SIPLACE 80S/F/G User’s Manual 6 Single Functions

Edition 07/97 from Software Version SR.010.xx 6.2 Gantry Functions 80S

6 - 11

6.2 Gantry Functions 80S

NOTE

During traverse functions of the x or y axes the protective cover must be closed and the start button pressed to

initiate the functions. As a fundamental rule the gantries travel only at low speed.

6.2.1 Menu "Gantry functions"

The menus "Gantry functions" for Gantry 1 and Gantry 2 are used for checking the functions which belong to

the gantry.

NOTE

Since the functions and menus are identical for both gantries, all functions are explained using just the

example of gantry 1.

To select the menu "Gantry functions" proceed as follows:

●

Use the

cursor keys

within the menu "Single functions" to select the menu item "Gantry 1".

●

Press the

Return key

. The "Gantry functions" menu is displayed on the screen.

●

Use the

cursor keys

within the menu "Gantry 1" to select the menu item "Gantry functions".

●

Press the

Return key

. The "Gantry 1" menu is displayed on the screen.

Fig. 6.2.1

Portalfunktionen

SI 80 V 10.x

Cluster:

Rüstung :

Display errors

Confirm errors

Machine options

Software options

Vision system

Error

State

Action

Single functions

Transportfkt.

Breitenverstell.

Gantry 1

Star head

CRDL

Star nozzle config

Gantry functions

Go to service pos'n

Go to waiting pos'n

Go to zero pulse

Gantry reference run

Gantry functions

Single functions

6 Single Functions SIPLACE 80S/F/G User’s Manual

6.2 Gantry Functions 80S Edition 07/97 from Software Version SR.010.xx

6 - 12

●

Press the

Esc key

twice to quit the menu. The gantry performs a reference run and the program jumps

back to the menu "Single functions".

NOTE

All travel functions of the main axes (x, y) must be launched using the start key. On the screen you will be

requested to press the start key by the message "Press start key” following the menu item "Action:” If the

protective cover is not closed you will be asked to close it by a message on the screen.

6.2.1.1 Go to Service Position

In the service position the gantry is in a position in which it is possible to carry out work on the placement head

and also other parts of the gantry.

To go to the service position proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Go

to service pos'n".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry travels to the service position.

6.2.1.2 Go to Waiting Position

The waiting position is the position in the machine which gantry travels to when the gantry is not required for

the placement sequence.

To go to the waiting position proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Go

to waiting pos'n".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry travels to the waiting position.

6.2.1.3 Go to Zero Pulse

Zero pulse is the position of the gantry used as a basis for the counter sequences of the incremental

encoders.

To go to the zero pulse proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Go

to zero pulse".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry travels to the zero pulse of the x

and y axes.

SIPLACE 80S/F/G User’s Manual 6 Single Functions

Edition 07/97 from Software Version SR.010.xx 6.2 Gantry Functions 80S

6 - 13

6.2.1.4 Gantry Reference Run

With the function gantry reference run the active gantry performs a reference run with the x and y axes.

To carry out the gantry reference run proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Gan-

try reference run".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry performs a reference run.