00191025-01 - 第145页

SIPLACE 80S/F/G User’s Manual 6 Single Functi ons Edition 07/97 from S oftware Version SR.010.xx 6.2 Gantry Functions 80S 6 - 13 6.2. 1.4 Gantry Reference Run With the function gantr y referenc e run the act ive gantry p…

6 Single Functions SIPLACE 80S/F/G User’s Manual

6.2 Gantry Functions 80S Edition 07/97 from Software Version SR.010.xx

6 - 12

●

Press the

Esc key

twice to quit the menu. The gantry performs a reference run and the program jumps

back to the menu "Single functions".

NOTE

All travel functions of the main axes (x, y) must be launched using the start key. On the screen you will be

requested to press the start key by the message "Press start key” following the menu item "Action:” If the

protective cover is not closed you will be asked to close it by a message on the screen.

6.2.1.1 Go to Service Position

In the service position the gantry is in a position in which it is possible to carry out work on the placement head

and also other parts of the gantry.

To go to the service position proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Go

to service pos'n".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry travels to the service position.

6.2.1.2 Go to Waiting Position

The waiting position is the position in the machine which gantry travels to when the gantry is not required for

the placement sequence.

To go to the waiting position proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Go

to waiting pos'n".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry travels to the waiting position.

6.2.1.3 Go to Zero Pulse

Zero pulse is the position of the gantry used as a basis for the counter sequences of the incremental

encoders.

To go to the zero pulse proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Go

to zero pulse".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry travels to the zero pulse of the x

and y axes.

SIPLACE 80S/F/G User’s Manual 6 Single Functions

Edition 07/97 from Software Version SR.010.xx 6.2 Gantry Functions 80S

6 - 13

6.2.1.4 Gantry Reference Run

With the function gantry reference run the active gantry performs a reference run with the x and y axes.

To carry out the gantry reference run proceed as follows:

●

Use the

cursor keys

within the menu "Gantry functions" to position the cursor bar over the menu item "Gan-

try reference run".

●

Press the

Return key

●

Press, for as long as you are asked to do so, the

Start button

. The gantry performs a reference run.

6 Single Functions SIPLACE 80S/F/G User’s Manual

6.2 Gantry Functions 80S Edition 07/97 from Software Version SR.010.xx

6 - 14