00191025-01 - 第162页
6 Single Functi ons SIPLACE 80S/F/G User’s Manual 6.3 Star Head Functions 80S Edition 07/97 from S oftware Version SR.010.xx 6 - 30 6.3. 4.8 Lock closed Procee d as follows to call the m enu item "Lo ck closed "…
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.3 Star Head Functions 80S
6 - 29
6.3.4.4 Return All Nozzles
Proceed as follows to call the menu item "Return all nozzles":
●
In the menu "Nozzle changer SP" use the cursor keys to move the cursor bar over the menu item
"Return all nozzles".
●
Press the
Return key
. All nozzles in the Star head will be returned to the corresponding magazine.
●
Press the Esc key to quit the "Return all nozzles" menu.
6.3.4.5 Pickup All Nozzles
Proceed as follows to call the menu item "Pickup all nozzles":
●
In the menu "Nozzle changer SP" use the cursor keys to move the cursor bar over the menu item "Pickup
all nozzles".
●
Press the
Return key
. All nozzles are taken up from the nozzle changer.
●
Press the Esc key to quit the "Pickup all nozzles" menu.
6.3.4.6 Remove All Nozzles
Proceed as follows to select the menu item "Remove all nozzles":
●
In the menu "Nozzle changer SP" use the cursor keys to move the cursor bar over the menu item "Remove
all nozzles".
●
Press the
Return key
. All nozzles in the Star head will be dropped into the rejects container.
●
Press the Esc key to quit the menu "Remove all nozzles".
6.3.4.7 Lock open
Proceed as follows to call the menu item "Lock open":
●
Using the cursor keys position the light bar over the menu item "Lock open" in the "Nozzle changer star"
menu.
●
Press the return key. The striking plate of the nozzle change will open the nozzle-changer lock.
●
To quit the "Lock open" menu press the escape key.
NOTE
Before you quit the "Nozzle changer star" menu, use the function "Lock closed" to close the open lock. See
Section 6.3.4.8.
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.3 Star Head Functions 80S Edition 07/97 from Software Version SR.010.xx
6 - 30
6.3.4.8 Lock closed
Proceed as follows to call the menu item "Lock closed":
●
Using the cursor key position the light bar over the menu item "Lock closed" in the "Nozzle changer star"
menu.
●
Press the return key. The striking plate of the nozzle change will close the nozzle-changer lock.
●
To quit the "Lock closed" menu press the escape key.
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.4 Transport Functions 80S
6 - 31
6.4 Transport Functions 80S
The transport functions are used for checking and adjusting the functional modules of the PCB conveyor. To
call up the menu "Transport" proceed as follows:
●
Use the
cursor keys
within the menu "Single functions" to select the menu item "Transport".
●
Press the
Return key
. The "Transport" menu is displayed on the screen.
Fig. 6.4.1
The menu "Transport" is divided into two areas. The lefthand area is used for selecting the functions. The
righthand area is for displaying the results which have been prepared by the computer (eg status of the sonar
BEROS, conveyor width).
●
You can use the
Esc key
to return to the menu "Single functions".
When the transport menu is quit the conveyor is moved to the initial position (stopper in initial position,
clamp opened).
NOTE
With travel functions of the x or y axes the protective cover must be closed and the start button pressed to
launch the function. The gantries travel without exception only at their low speed. The star has been pro-
grammed to "low speed".
SI80 V 10.x
Nutzen:
Rüstung :
Display errors Machine options
Error
State
Action
:
:
:
Single functions
Transportfkt.
Breitenverstell.
Transport
Transport width [mm]:
PCB to output conveyor
Actuate stopper
Actuate clamping
Sensor state
Width adjustment
Measure transp. width
Operate ceramic center.
Conveyor speed
Single functions
PCB to center conveyor
Single functions