00191025-01 - 第169页
SIPLACE 80S/F/G User’s Manual 6 Single Functi ons Edition 07/97 from S oftware Version SR.010.xx 6.5 Gantry Functions 80 F 6 - 37 6.5 Gantry Func tions 80 F The gan try functio ns of the SIPL ACE 80F ar e identical with …
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.4 Transport Functions 80S Edition 07/97 from Software Version SR.010.xx
6 - 36
6.4.9 Measuring the Conveyor Width
●
Use the cursor keys to select the menu item "Measure conveyor width" in the "Conveyor functions" menu.
The conveyor width will be measured and stored.
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.5 Gantry Functions 80 F
6 - 37
6.5 Gantry Functions 80 F
The gantry functions of the SIPLACE 80F are identical with the gantry functions of the SIPLACE 80S. Differ-
ences can exist in the software version notice and also in the header of the screen menus. This does not how-
ever have any influence on the functions. In Section 6.5 "Gantry Functions 80 F" only the additional gantry
functions of the SIPLACE 80F are treated.
For all other gantry functions reference will be made in this section to Section 6.2 "Gantry Functions 80S" of
the SIPLACE 80S information. The SIPLACE 80 F is equipped with one gantry upon which one IC head and
one revolver head are mounted.
If at a later point in time function changes or additions are made which affect the SIPLACE 80S Section 6.5
"Gantry Functions 80 F" will be revised accordingly.
NOTE
With travel functions of the x or y axes the protective cover must be closed and the start button pressed to
launch the function. The gantry travels without exception only at a slow speed.
To select the menu "Gantry" proceed as follows:
●
In the menu "Single functions" use the
cursor keys
to select the menu item "Gantry".
●
Press the
return key
. The "Gantry" menu is displayed on the screen.
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.5 Gantry Functions 80 F Edition 07/97 from Software Version SR.010.xx
6 - 38
Fig. 6.5.1
NOTE
For the menu "Gantry functions" see Section 6.2 "Gantry Functions 80S".
For the menu "Star head" see Section 6.3 "Star Head Functions 80S".
For the menu "IC head" see Section 6.6 "Head Functions 80 F".
The functions "Display errors" are described in Section 5.7 "Display Functions" in more detail.
The function "Cycle Mode" is described in Section 5.6.8 "Abort Menu" in more detail.
SI 80F V 10.x
Cluster:
RüstunGantry functions
Display errors
Confirm errors
Machine options
Software options Vision system
Error
State
Action
:
:
:
Single functions
Breitenverstell.
Gantry
Gantry functions
Star head
IC head
Display errors
Cycle mode
Single functions
Single functions