00191025-01 - 第174页

6 Single Functi ons SIPLACE 80S/F/G User’s M anual 6.6 Head Functions 80 F Edition 07/97 from Software Version SR.010.xx 6 - 42 6.6.1.3 Clamping z Axis Upon acti vation of t his functio n the z axis is clampe d. To launc…

100%1 / 736
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.6 Head Functions 80 F
6 - 41
Fig. 6.6.2
SI 80F V 10.x
Rüstung :
Display errors
Confirm errors
Machine options
Vision system
Error
State
Action
:
:
:
Single functions
Breitenverstell.
Gantry
Prüfgerät
Pipettenkonf.
IC head
Current nozzle number:
Vacuum values open:
Single functions
416
25 %
Software options
Single functions
Head reference run
Turn D axis
Vacuum On
Vacuum Off
Blow out On
Blow out Off
Return nozzle
Pick-up nozzle
Nozzle changer set-up
Vacuum test
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.6 Head Functions 80 F Edition 07/97 from Software Version SR.010.xx
6 - 42
6.6.1.3 Clamping z Axis
Upon activation of this function the z axis is clamped.
To launch the function "Clamping z axis" proceed as follows.
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item
"Clamping z axis".
Fig. 6.6.3
●
Press the
return key
. The z axis is then clamped. In the menu window the message "IC head: Z axis clamp-
ing actuated" is displayed.
●
Terminate this function with the
Esc key
. The Z axis is then unclamped.
6.6.1.4 Turn D Axis
Upon activation of this function the D axis can be checked. Here the D axis is rotated.
To launch the function "Turn D axis" proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item
"Turn D axis".
Press the
Return key
. The D axis will be rotated.
SI 80F V 10.x
Nutzen:
Rüstung :
BE - Zuführung Display errors
Confirm errors
Machine options
Software options Vision system
Error
State
Action
:
:
:
Single functions
Portal 2
Transportfkt.
Breitenverstell.
Portal 1
Nullimpuls anfahren
Portal - Referenzlauf
Kopf
Prüfgerät
Pipettenkonf.
IC head
Head reference run
Vacuum test
Vakuum aus
Blasez-Achse ist geklemmts
d-Achse drehen
PipettESC
Blasen ein
Pipette abholen
IC head: Z axis clamping actuated
ESC.: abort
Current nozzle number: 416
Clamping Z axis
Gantry
Single functions
Single functions
Clamping Z axis
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.6 Head Functions 80 F
6 - 43
6.6.1.5 Vacuum On
Upon activation of this function the vacuum is switched on. At the same time if blowing is active this will be
switched off.
To launch the function "Vacuum on" proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item "Vacuum
on".
Press the
Return key
. The vacuum is switched on.
6.6.1.6 Vacuum Off
Upon activation of this function the vacuum is switched off.
To launch the function "Vacuum off" proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item "Vacuum
off". Press the
Return key
. The vacuum is switched off.
6.6.1.7 Blow-Out On
Upon activation of this function blowing-out at the nozzle is switched on. At the same time if vacuum is active
this will be switched off.
To launch the function "Blow-out on" proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item "Blow-out
on".
Press the
Return key
. At the nozzle blowing-out is now activated.
6.6.1.8 Blow-Out Off
Upon activation of this function blowing-out at the nozzle is switched off.
To launch the function "Blow-out off" proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item "Blow-out
off".
Press the
Return key
. At the nozzle blowing-out is now deactivated.