00191025-01 - 第273页
SIPLACE 80S/F/G User’s Manual 7 Vision Systems Edition 07/97 from S oftware Version SR.010.xx 7.6 Test Component Line engi neer 7 - 81 7.6. 3.5 Option “Test component” NOTE This opti on can only be activate d if a GF nu …
7 Vision Systems SIPLACE 80S/F/G User’s Manual
7.6 Test Component Edition 07/97 from Software Version SR.010.xx
7 - 80 Line engineer
Cross:
White: measured ball candidates which are defined in the GF file.
Cross-hairs:
White: results of position recognition -> x, y, angle
Star:
White: Position of the component
Synthetic representation of ball model
In pixel resolution on the lefthand edge of the video screen
A description is provided under the heading "Grid-Driven Mode".
SIPLACE 80S/F/G User’s Manual 7 Vision Systems
Edition 07/97 from Software Version SR.010.xx 7.6 Test Component
Line engineer 7 - 81
7.6.3.5 Option “Test component”
NOTE
This option can only be activated if a GF number has already been entered.
If a component is not optically centered, you have the choice of checking the centering procedure with this
option. The measurement result is presented visually on the screen; measurement results are not saved.
Fig. 7.6.11
When this function is activated the following actions are initiated:
–
The measuring procedure is activated.
–
The video image is displayed on the screen.
–
Top and bottom lines appear.
Error
State
Action
Check component step by step
Single functions
:
:
:
Cluster:
SI80 V 10.x
Vision system
Vision system
Vision system
Version: 2133
Setup:
Test component
Enter GF number
Pickup component
Display component
Measure component
Test component
Edit GF data
Change measure mode
Refill
Display errors
Test output
7 Vision Systems SIPLACE 80S/F/G User’s Manual
7.6 Test Component Edition 07/97 from Software Version SR.010.xx
7 - 82 Line engineer
Fig. 7.6.12
●
With the "RETURN" key you can call the individual measurement steps one after the other. Every time you
press the "RETURN" key a measurement command is performed and the result displayed on the screen.
●
With "ESC" you may quit the option. The video image disappears and the menu “Test component” is dis-
played.
GF No. = 5
Test component
RET: Test component