00191025-01 - 第42页

1 Operational Safety SIPLACE 80S/F/G User’s Manual 1.2 Safety Devices Ed ition 07/97 from Software Version SR.010.xx 1 - 6 1.2. 1.1 Gen eral Informa tion The traveli ng range of the gantries is cove red by two protectiv …

SIPLACE 80S/F/G User’s Manual 1 Operational Safety

Edition 07/97 from Software Version SR.010.xx 1.2 Safety Devices

1 - 5

1.2 Safety Devices

1.2.1 Protective Covers

Fig. 1.2.1 Safety features SIPLACE 80S

Key to Fig. 1.2.1

Cover and guard on the input conveyor Safety screen on right side

Protective cover Cover and guard on the output conveyor

Protective cover Safety screen on left side

1 Operational Safety SIPLACE 80S/F/G User’s Manual

1.2 Safety Devices Edition 07/97 from Software Version SR.010.xx

1 - 6

1.2.1.1 General Information

The traveling range of the gantries is covered by two protective covers. If you wish to open the protective cov-

ers, you must either turn the key switch or press the HOLD button. The gantries will stop immediately if the

protective covers or the cover over the input / output belt are opened while the key switch is activated. The

power to the gantry axes will be switched off. Placement stops when the emergency stop button is pressed.

You can then either stop or continue placement of the PCBs.

The safety screens at the sides can be opened when the machine is stopped in order to top up with compo-

nents.

WARNING

∆

Only appropriately qualified and trained personnel may open the protective covers when the key-operated

switch is deactivated!

SIPLACE 80S/F/G User’s Manual 1 Operational Safety

Edition 07/97 from Software Version SR.010.xx 1.2 Safety Devices

1 - 7

1.2.2 Guard on the Input / Output Conveyor

DANGER

∆

The guard must always be set to the height of the PCB to be processed. Ensure that the gap between the

guard and the safety bar is as small as possible.

Guards are fitted on the input and output conveyors of the PCB conveyor.

The height of the guard must be set using the slots so that the processed PCB can travel through.

Fig. 1.2.2 Guard on SIPLACE 80S/F/G

- Key to Fig. 1.2.2

➀

Safety bar (fixed)

➁

Guard (adjustable)

➂

Slots for adjusting the height

➃

Cover