00191025-01 - 第44页

1 Operational Safety SIPLACE 80S/F/G User’s Manual 1.2 Safety Devices Ed ition 07/97 from Software Version SR.010.xx 1 - 8 1.2.3 EMERGENCY-STOP Button and Key-Operat ed Switch Fig. 1.2.3 Location of switche s - Key to F …

SIPLACE 80S/F/G User’s Manual 1 Operational Safety

Edition 07/97 from Software Version SR.010.xx 1.2 Safety Devices

1 - 7

1.2.2 Guard on the Input / Output Conveyor

DANGER

∆

The guard must always be set to the height of the PCB to be processed. Ensure that the gap between the

guard and the safety bar is as small as possible.

Guards are fitted on the input and output conveyors of the PCB conveyor.

The height of the guard must be set using the slots so that the processed PCB can travel through.

Fig. 1.2.2 Guard on SIPLACE 80S/F/G

- Key to Fig. 1.2.2

➀

Safety bar (fixed)

➁

Guard (adjustable)

➂

Slots for adjusting the height

➃

Cover

1 Operational Safety SIPLACE 80S/F/G User’s Manual

1.2 Safety Devices Edition 07/97 from Software Version SR.010.xx

1 - 8

1.2.3 EMERGENCY-STOP Button and Key-Operated Switch

Fig. 1.2.3 Location of switches

- Key to Fig. 1.2.3

STOP button START button

EMERGENCY-STOP button EMERGENCY-STOP button

START button STOP button

➆

Component counter

➇

Key switch

SIPLACE 80S/F/G User’s Manual 1 Operational Safety

Edition 07/97 from Software Version SR.010.xx 1.2 Safety Devices

1 - 9

1.2.3.1 Description of Functions

●

EMERGENCY STOP Button:

When the EMERGENCY STOP button is actuated the control voltage of the gantry axes is switched off. This

means that the gantry axes are then without power and no longer present any danger.

NOTE

Placement is interrupted and once the operating capability of the system has been restored can either be

resumed or be aborted.

●

Key-operated switch:

When the key-operated switch is actuated the gantry axes retain their full control voltage. The protective cov-

ers are unlocked and can be opened. After the protective covers have been opened the machine comes to a

stop immediately.

WARNING

∆

Despite all of the safety measures provided by the manufacturer severe injuries to person (eg by the gantry)

and/or considerable material damage can occur if the machine is improperly operated!

Safe operation of the machine presupposes that the machine is operated properly by qualified personnel with

all warning notes being observed!

Certain work on the machine (eg setting-up and adjustment) demand training which goes beyond the contents

of this operating manual.

❒