00191025-01 - 第448页

SIPLACE 80S/F/G User’s Manual 9 Maintenance Edition 07/97 from S oftware Version SR.010.xx 9.7 Wafflepack Changer 9 - 89 9.7 Wafflep ack Changer The location of the wafflepack changer in th e SIPLACE 80F 4 /80F 4 -6 mach…

100%1 / 736
9 Maintenance SIPLACE 80S/F/G User’s Manual
9.6 IC Head (SIPLACE 80F) Edition 07/97 from Software Version SR.010.xx
9 - 88
SIPLACE 80S/F/G User’s Manual 9 Maintenance
Edition 07/97 from Software Version SR.010.xx 9.7 Wafflepack Changer
9 - 89
9.7 Wafflepack Changer
The location of the wafflepack changer in the SIPLACE 80F
4
/80F
4
-6 machines is shown in Fig. 9.1.2, Page 9 - 4.
9.7.1 Cleaning the Air Filter of the Electronic Plug-in Unit
●
Clean the air filter LZ60 on the bottom of the housing of the electronic plug-in unit with the vacuum cleaner.
Fig. 9.7.1 Air filter on the electronic plug-in unit the WPC
Key to Fig. 9.7.1
1 Electronic plug-in unit
A Clean the air filter with vacuum cleaner
9 Maintenance SIPLACE 80S/F/G User’s Manual
9.7 Wafflepack Changer Edition 07/97 from Software Version SR.010.xx
9 - 90
9.7.2 Maintaining the Wafflepack Changer
The wafflepack changer is maintained in conjunction with every second or fourth scheduled maintenance for
the empty tape cutter, when it is removed from the machine.
NOTE
Always carry out maintenance only after emptying the wafflepack changer or before setting up the wafflepack
changer. When the wafflepack changer is being removed or installed there should not as a rule be any compo-
nents in the magazines as this could easily fall out and cause problems during placement. If the magazines
have not yet been run to empty before maintenance of the wafflepack changer or of the empty tape cutter, use
a waterproof marker pen to mark on the trays the track numbers engraved on the lift before you remove each
tray.
You will need these allocations when you replace the trays later. Now set the tray with magazine down to one
side, but making sure you do not change the rotational position of the magazines in the tray.
Fig. 9.7.2 Maintenance of the wafflepack changer
Sequence of work in Fig. 9.7.2
A Bring the lift into the
Refill
position.
B Open the safety door.
C Maintain the guide rails.
D Lubrication nipple accessible.
E Maintain the z lift axes.