00191025-01 - 第488页

SIPLACE 80S/F/G User’s Manual 10 SIPLACE G Edition 07/97 from S oftware Version SR.010.xx 10.4 Glueing A djustments 10 - 21 10.4.3.2 Spacer Angle G U1 Procee d as follows to call the menu item "Spacer a ngle": …

10 SIPLACE G SIPLACE 80S/F/G User’s Manual

10.4 Glueing Adjustments Edition 07/97 from Software Version SR.010.xx

10 - 20

10.4.3.1 New Glue Type Line

Proceed as follows to call the menu item "New gluetype line":

●

In the menu "Modify system data" use the cursor keys to move the cursor bar over the menu item "New

gluetype line" of the dispenser unit in question.

●

Press the return key. The "New gluetype line" menu is displayed on the screen.

Fig. 10.4.8

●

Use the cursor keys to move the cursor bar over the gluetype line you wish to specify and confirm with the

Return key.

●

Press the Esc key if you wish to quit the "Modify system data" menu without making any changes.

SI 80G V 10.x

Rüstung :

Machine options

Software options Vision system

State

Action

Glueing adjustmts

Single functions

Error

Modify system data

New gluetype line GU1/2

UHU

Glueing steps

(min./max.)

Nozzle

[mm]

Spacer

[mm]

Heraeus PD23 3 - 12 0.30 0.25

12 - 20 0.60 0.30

Pattex 25 5 - 15 0.44 0.10

Pattex 26 0.44 0.10

Pattex 27 0.44 0.10

5 - 15

Ret.: new char. line

SIPLACE 80S/F/G User’s Manual 10 SIPLACE G

Edition 07/97 from Software Version SR.010.xx 10.4 Glueing Adjustments

10 - 21

10.4.3.2 Spacer Angle GU1

Proceed as follows to call the menu item "Spacer angle":

●

In the menu "Modify system data" use the cursor keys to move the cursor bar over the menu item "Spacer

angle" of the dispenser unit in question.

●

Press the return key. The "Spacer angle GU1" menu is displayed on the screen.

Fig. 10.4.9

●

Input the new angel (0 to 359 in degrees) into the input box and confirm with the return key.

●

Press the Esc key if you wish to quit the "Spacer angle GU1" menu without making any changes.