00191025-01 - 第533页

11 Station Extensions S IPLACE 80S/F/G User’s Manual 11.1 Nozzle-Changer for Revolver Head Edition 07/97 from Software Vers ion SR.010.xx 11 - 8

SIPLACE 80S/F/G User’s Manual 11 Station Extensions

Edition 07/97 from Software Version SR.010.xx 11.1 Nozzle-Changer for Revolver Head

11 - 7

11.1.6 Position Recognition

Each of the magazines holds a position fiducial for position recognition.

Fig. 11.1.3 Relationship between nozzle changer and position recognition

●

For handling fiducials see Chapter 7, ’Vision Systems’, of this User's Manual.

11 Station Extensions SIPLACE 80S/F/G User’s Manual

11.1 Nozzle-Changer for Revolver Head Edition 07/97 from Software Version SR.010.xx

11 - 8

SIPLACE 80S/F/G User’s Manual 11 Station Extensions

Edition 07/97 from Software Version SR.010.xx 11.2 Nozzle Changer for IC Head (ICPW20)

11 - 9

11.2 Nozzle Changer for IC Head (ICPW20)

11.2.1 Overview

Fig. 11.2.1 Location where the nozzle changer for the IC head is installed

The nozzle changer is of modular design and consists of at least 1 but at most 4 magazines, each with

5 nozzle garages.

The magazines are placed on a shared carrier which is located in the area between the board conveyor and

the feed modules.

The individual magazines are fastened to the carrier by means of a countersunk screw in the central nozzle

garage.

The precise positioning of the magazines with respect to one another is regulated by means of two alignment

pins.